13
ENGLISH
Indications
Item
( : Initial)
Selectable settings, [reference page]
DEMO
Display
demonstration
•
DEMO ON
•
DEMO OFF
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [6].
: Cancels.
CLOCK DISP
*
1
Clock display
•
CLOCK ON
•
CLOCK OFF
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [6].
CLOCK HOUR
Hour adjustment
1 – 12
[Initial: 1 (1:00)], [6]
CLOCK MIN
Minute adjustment
00 – 59
[Initial: 00 (1:00)], [6]
DIMMER
Dimmer
•
AUTO
•
ON
•
OFF
: Dims the display and button illumination when you turn on the
headlights.
: Activates dimmer.
: Cancels.
SCROLL
*
2
Scroll
•
ONCE
•
AUTO
•
OFF
: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
L/O MODE
Line output mode
•
REAR
•
SUB.W
: Select if the REAR LINE OUT terminals are used for connecting the
speakers (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
SUB.W FREQ
*
3
Subwoofer cutoff
frequency
•
LOW
•
MID
•
HIGH
: Frequencies lower than 90 Hz are sent to the subwoofer.
: Frequencies lower than 135 Hz are sent to the subwoofer.
: Frequencies lower than 180 Hz are sent to the subwoofer.
TAG DISPLAY
Tag display
•
TAG ON
•
TAG OFF
: Shows the Tag information while playing MP3/WMA tracks, [10].
: Cancels.
AMP GAIN
Amplifier gain
control
•
LOW POWER
•
HIGH POWER
: VOLUME 00 – VOLUME 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speaker.)
: VOLUME 00 – VOLUME 50
*
1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select
“CLOCK OFF” that you save the car’s battery.
*
2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
3
Displayed only when “L/O MODE” is set to “SUB.W.”
EN08-15_KD-G646_001A_f.indd 13
EN08-15_KD-G646_001A_f.indd 13
10/11/07 11:14:34 AM
10/11/07 11:14:34 AM