JVC JY-HM360AG, Инструкция по эксплуатации

Страница: 92 / 136

Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail) in the horizontal (H) or vertical (V) direction.
0
H+1 to H+4:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+4:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4,
R
Normal, V+1 to V+4]
Memo :
0
When [System] under [Record Format] is set to
“SD”, this item is fixed at “Normal”.
White Balance Item
Preset Temp.
For setting the color temperature when the [WHT
BAL] switch is set to “PRESET”.
For details, refer to “[Adjusting the White Balance]
(
A
P 51)”.
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT BAL] switch is set to “PRESET”,
pressing the [
y
] button each time switches the
color temperature setting in the Preset mode.
([Preset Temp.]
1
[Alternative Temp.])
For details, refer to “[Adjusting the White Balance]
(
A
P 51)”.
AWB Paint
For adjusting the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to “[Adjusting the White Balance]
(
A
P 51)”.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (
R
0)]
Memo :
0
This item is selectable when the [WHT BAL]
switch on the right of the camera recorder is set
to “A” or “B”. When “PRESET” is set, this item
appears as “---” and cannot be selected.
0
Different values can be specified for “A” and “B”.
0
After the [
y
] (Auto White Balance) button is
pressed to readjust the white balance while
[Clear Paint After AWB] is set to “On”, R and B
values switch automatically to “0”.
Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
0
On:
Sets the [AWB Paint] (R value and B value)
settings to “0” after executing AWB (Auto White
Balance).
0
Off:
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values:
R
On, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (
R
0)]
92
Camera Process Menu
Menu
Display and
D
etailed
S
etti
ngs