JVC JY-HM360AG, Инструкция по эксплуатации

Страница: 87 / 136

Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On,
R
Off]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(
A
P100 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When “On” is selected, set the Level.
[Setting Values: On,
R
Off]
9
Level
For setting the level of the image stabilizer.
[Setting Values: High,
R
Normal]
Memo :
0
When “High” is selected, correcting severe
camera shake may cause the area surrounding
the image to darken.
0
When “High” is selected, the angle of view
becomes narrower at the wide angle end.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On,
R
Off]
Shutter
For specifying shutter-related settings.
Use this item to set to “Step” (fixed value) or
“Variable” when operating with the cross-shaped
button (
JK
) on the right side.
0
Variable:
Sets to variable scan. Use this setting such as
when shooting a PC monitor.
0
Step:
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable,
R
Step]
AE Level
For setting the convergence level during AE (Auto
Exposure).
This can also be adjusted using the cross-shaped
button (
HI
) on the right side.
[Setting Values: -6 to +6 (
R
0)]
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values:
R
Fast, Middle, Slow]
AGC Limit
For setting the maximum gain value of “AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values:
R
24dB, 18dB]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT BAL] selection switch.
[Setting Values: Fast, Middle, Slow,
R
Off]
Memo :
0
This function is disabled when the [FULL AUTO
ON/OFF] switch is set to “ON” or when Scene
Select mode is activated.
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
When the [FULL AUTO ON/OFF] switch is set to
“ON” or when Scene Select mode is activated, the
setting is fixed at “AGC”.
[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,
9dB, 6dB, 3dB, 0dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
AE LEVEL SW
For specifying the operation of the cross-shaped
button (
HI
) on the right side.
0
Enable:
Enables the button.
0
Disable:
Disables the button.
[Setting Values: Enable,
R
Disable]
Dynamic Zoom
For setting whether to enable the dynamic zoom
function.
[Setting Values: On,
R
Off]
Handle Zoom Speed
This function allows you to set the zoom speed of
the zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to “FIX”.
[Setting Values: 1 to 8 (
R
5)]
Camera Function Menu
87
Menu
Display and
D
etailed
S
etti
ngs