JVC JY-HM360AG, Инструкция по эксплуатации

Страница: 60 / 136

1 Select [Main Menu]
B
[TC/UB]
B
[TC
Preset] and press the Set button (
R
).
(
A
P93 [ TC Preset ] )
The [TC Preset] screen appears.
.
1
Memo :
0
When [TC/UB]
B
[TC Generator] is set to
“Regen”, the parameter is displayed as “Regen”
and cannot be selected.
(
A
P93 [ TC Generator ] )
2 Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (
HI
) to place the
cursor at the item to set, then use the cross-
shaped button (
JK
) to change the values.
.
During drop frame
During non-drop
frame
Cursor
Memo :
0
Press the [OIS/2] button to reset each digit to “0”.
The cursor moves to the time digit (left).
3
Check the values and press the Set button
(
R
).
0
The time code is set and the screen returns
to [TC/UB].
0
To cancel the setting, press the [CANCEL]
button.
4
Press the [MENU/THUMB] button.
Returns to the normal screen.
Setting Time Code without Opening the
Menu
.
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
FOCUS ASSIST/1 OIS / 2
TIME CODE
Memo :
0
Settings cannot be made in the following cases.
0
[TC/UB]
B
[TC Generator] has been set to
“Regen”.
0
Menu screen is displayed.
0
The camera recorder is not in the Camera
mode.
Setting Time Code
1
Set [TC/UB]
B
[TC Generator] to a value
other than “Regen”.
(
A
P93 [ TC Generator ] )
2
Hold down the [MENU/THUMB] button and
press the [FOCUS ASSIST/1] button.
The [TC Preset] setting screen appears.
.
During drop frame
During non-drop frame
Cursor
3
Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (
HI
) to place the
cursor at the item to set, then use the cross-
shaped button (
JK
) to change the values.
Memo :
0
Press the [OIS/2] button to reset each digit to “0”.
The cursor moves to the time digit (left).
60
Setting Time Code Generator
Sh
ooting