- 26 -
the upper left corner of the screen when the
selected page is found.
Press
button to display the selected
Teletext page.
To exit Teletext
Press
button. The screen will switch to
TV mode.
Fastext and Toptext
Your TV supports the 7 page Teletext system.
When the page number of any of the 7 pages
in memory is entered, the system will not
search for the requested page; instead it will
display the page automatically.
Press
button to move the Teletext
screen forward one page at a time.
Press
button to move the Teletext
screen backward one page at a time.
For Fastext and Toptext
The subject-heading for the information may
have a particular colour.
Press an appropriate
RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant
page quickly.
For TOPTEXT
If Toptext transmission is present, colour
coded buttons will appear in status row.
If Toptext transmission is not present, status
row will not appear.
In Toptext mode the
or
com-
mands will request the next or previous page
respectively. If Toptext transmission is not avail-
able, in case of operation of these commands,
wraparound occurs. For example page 100
appears to be one greater than page 199.
Peripheral Equipment
Connections
There is a wide range of audio and video equip-
ment that can be connected to your TV.
Connection diagrams at the and of this section
show you where the different equipment should
be connected at the back side of the TV.
Via the Euroconnector
Your TV set has 2 Euroconnector sockets. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors, to
your TV, use
SCART
input.
If an external device is connected via Euro-
connector sockets TV is switched to AV mode
automatically. In this case if both sockets are
connected
SCART
has the precedence.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible
VCR to the
EXT.2
terminal. If not, the T-V LINK
function will not work properly.
When connecting a T-V LINK compatible VCR
to the EXT.2 terminal, be sure to connect the
decoder to the VCR. If not, the
T-V LINK
func-
tion may not work properly. And then set the
Decoder(EXT-2)
function for the channel to
ON
to unscramble a scrambled channel.
RGB mode
If an equipment can output the
RGB
signals,
connect it to the
EXT-1
or
EXT-2
terminal.
EXT-2 S Mode
If the equipment connected to your TV set sup-
ports S-Video (Y/C) output from Euroconnec-
tor, you can have a better picture quality by
selecting
EXT-2
S mode and connecting your
equipment to the
EXT.2 (EXT-2 S)
terminal of
TV. See your equipment's booklet to check if
your equipment has such feature.
Via the RCA jacks
If you have an equipment (such as a Cam-
corder) which has the RCA jacks, connect it to
the
EXT-4
terminal with the video and audio
cables.
If you have a device which outputs component
JVC LT-17C88SJ-50058783.p65
15.02.2005, 13:49
26