JVC HR-S9400EK, Инструкция по эксплуатации

Страница: 5 / 68

5
AV1 OUT
COMP. Y/C
AV1 IN/OUT
RF OUT
AV2 IN
PAUSE/
R.A.EDIT
ANT.IN
R R
L L
AUDIO
IN OUT
S
IN OUT
TV Aerial Cable (not provided)
ATTENTION
If you have finished all the necessary connections, go to "Video Channel Set" on page 8, then
perform Auto Set Up on page 10; do NOT press the
button on the recorder/remote
control to turn on the recorder's power before you start Auto Set Up.
AV1 OUTPUT SIGNAL SELECTION
The AV1 IN/OUT connector accepts only a composite signal (regular video signal), but can deliver either a composite video
signal or a Y/C signal (a signal in which the luminance and chrominance signals are separated) according to the setting of the
rear panel AV1 OUT switch.
●
If your TV's 21-pin AV input connector (SCART) is compatible only with the regular video signal, set this switch to COMP.
●
If your TV's 21-pin AV input connector (SCART) is compatible with the Y/C signal, set this switch to Y/C. You will better enjoy
high-quality S-VHS pictures.
IMPORTANT:
●
Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.
●
For switching the TV's mode, refer to the instruction manual of your television.
Back of Recorder
AV1 OUT Switch