JVC GZ-RX621, Подробное руководство пользователя

Страница: 75 / 179

Capturing a Required Part in the Video
(TRIMMING)
Select the required part of a video and save it as a new video file.
0 The original video remains in its existing location.
1
Open the LCD monitor.
.
A
0 Check if the recording mode is
A
.
0
If the mode is
B
still image, tap
B
on the recording screen to display
the mode switching screen.
Tap
A
to switch the mode to video.
2
Tap
M
to select the playback mode.
.
≪
PLAY REC MENU
3
Tap “MENU”.
.
≪
REC
PLAY
4
Tap “EDIT”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “TRIMMING”.
.
TRIMMING
EDIT
6
Tap the video to edit.
.
QUIT
TRIMMING
7
Tap
e
to pause playback at the desired start point, then tap “A”.
.
0:01:23 0:12:34
QUIT
TRIMMING
0
When “A” is tapped, the start point is set.
0 After setting the start point, tap
d
to continue playback.
8
Tap
e
to pause playback at the desired end point, then tap “B”.
.
0:01:23
A 0:00:23
0:12:34
QUIT
TRIMMING
0 When “B” is tapped, the end point is set.
0 To reset the start or end point, tap “A” or “B” at the desired scene
(position).
0 You can fine adjust the position by pressing
l
and
k
while
playback is paused.
9
Tap “SET”.
.
0:01:23
A 0:00:23 B 0:12:34
0:12:34
QUIT SET
TRIMMING
0 When “SET” is tapped, the trimming area is confirmed.
10
Tap “YES”.
.
NO YES
SPECIFIC AREA?
DO YOU WANT TO CAPTURE A
0
After copying, tap “OK”.
0 When copying finishes, the copied file is added to the index screen.
Memo :
0 The division point may deviate slightly from the selected scene.
Editing
75