JVC GY-HM850CHE, Инструкция по эксплуатации

Страница: 115 / 220

9
Stretch Level
Stretch amount increases when a larger value is
specified.
[Setting Values: 1 to 5 (
R
3)]
Memo :
0
This item is displayed only when [Black Toe] is
set to “Stretch”. Otherwise, this item appears as
“---” and cannot be selected.
9 Compress Level
Compression amount increases when a larger
value is specified.
[Setting Values: 1 to 5 (
R
3)]
Memo :
0
This item is displayed only when [Black Toe] is
set to “Compress”. Otherwise, this item appears
as “---” and cannot be selected.
Knee
For specifying the “Knee” operation, which
compresses video signals beyond a certain level to
show the gradation of the highlighted portion. To
check the gradation of a bright area, set to “Manual”
and adjust the knee point (starting point of knee
operation) manually.
0
Manual:
Enables manual adjustment of knee point using
[Level].
0
Auto:
Adjusts the knee point automatically according
to the luminance level.
[Setting Values: Manual,
R
Auto]
Memo :
0
When [WDR] is set to other than “Off”, this item
appears as “---” and cannot be selected.
9
Level
For setting the starting point (knee point) of knee
compression when [Knee] is set to “Manual”.
[Setting Values:
R
100.0%, 97.5%, 95.0%, 92.5%,
90.0%, 87.5%, 85.0%]
Memo :
0
When [Knee] is set to other than “Auto”, or
[WDR] is set to other than “Off”, this item
appears as “---” and cannot be selected.
9
Sensitivity
For setting the response speed of the “Knee”
operation when [Knee] is set to “Auto”.
Set to “Slow” when shooting an object under a
condition where there is drastic change in the light
intensity.
[Setting Values:
R
Fast, Middle, Slow]
Memo :
0
When [Knee] is set to “Manual”, or [WDR] is set
to other than “Off”, this item appears as “---” and
cannot be selected.
White Clip
For setting the point to apply white clip for input
video signals with a high luminance level.
0
108%:
Applies white clip at the point where the
luminance level is 108 %.
0
103%:
Applies white clip at the point where the
luminance level is 103 %.
0
100%:
Applies white clip at the point where the
luminance level is 100 %. Set to this value when
the system in use limits Y output signals within
100 %.
[Setting Values:
R
108%, 103%, 100%]
Memo :
0
When [WDR] is set to other than “Off”, this item
appears as “108%” and cannot be selected.
Gamma
For adjusting the gamma curve that determines the
gradation expression.
0
Cinema:
Sets to a gamma curve with similar gradation to
the screen characteristics of movies.
0
Standard:
Sets to a standard gamma curve.
[Setting Values: Cinema,
R
Standard]
Memo :
0
When [WDR] is set to other than “Off”, this item
appears as “---” and cannot be selected.
Camera Process Menu
115
Menu
Display and
D
etailed
S
etti
ngs