JVC GY-HM850CHE, Инструкция по эксплуатации

Страница: 114 / 220

White Balance
0
SW Set:
In the Full Auto mode, the white balance
operation follows the setting of the [WHT.BAL B/
A/PRESET] switch.
0
FAW:
In the Full Auto mode, white balance is set to
forced auto.
[Setting Values: SW Set,
R
FAW]
Memo :
0
If the remote control unit comes with an FAS
feature, the setting is fixed at “FAW” and
selection is disabled.
(
A
P166 [Functions Operable from the Remote
Control Unit] )
Bars
0
Menu Set:
In the Full Auto mode, color bar output follows
the menu setting by switch operation.
0
Off:
In the Full Auto mode, color bar output is set
forcibly to Off.
[Setting Values: Menu Set,
R
Off]
Memo :
0
If the remote control unit comes with an FAS
feature, the setting is fixed at “Off” and selection
is disabled.
(
A
P166 [Functions Operable from the Remote
Control Unit] )
Audio
0
SW Set:
In the Full Auto mode, the audio recording level
follows the settings of the [AUDIO SELECT]
switch and [AUDIO LEVEL] adjustment knob.
0
Auto:
In the Full Auto mode, audio recording level is
set to forced auto.
[Setting Values: SW Set,
R
Auto]
Camera Process Menu
Menu screen for adjusting the quality of camera
images.
This item cannot be selected in the Media mode.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: -10 to +10, Off (
R
0)]
9 Adjust...
For specifying the detailed settings of the contour
(detail).
(
A
P117 [Detail/Adjust Item] )
Memo :
0
This item cannot be selected when [Detail] is set
to “Off”.
Master Black
For adjusting the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: -50 to +50 (
R
-3)]
Black Toe
Process the dark areas according to the balance of
bright and dark areas in the image to adjust the
overall balance of contrast.
For altering the gain of dark areas. Adjust this item
according to the condition of the captured video
signals.
0
Stretch:
Increases the gain of dark areas in an image to
stretch the signals of these areas only, thereby
showing the contrast between bright and dark
areas more clearly.
Specify the amount of stretch with [Stretch
Level].
0 Normal:
Normal condition.
0
Compress:
Compresses the gain of dark areas to increase
the contrast when the entire image appears
bright and contrast is weak. Specify the
compression amount with [Compress Level].
[Setting Values: Stretch,
R
Normal, Compress]
Memo :
0
When [WDR] is set to other than “Off”, this item
appears as “---” and cannot be selected.
114
Camera Function Menu
Menu
Display and
D
etailed
S
etti
ngs