JVC GY-HM790U, Инструкция по эксплуатации

Страница: 40 / 144

36
Shooting
Preparations
1
Attach the accessories. ( A Page 21)
2
Supply battery or AC adapter power to the camera
recorder. ( A Page 22)
3
Insert an SDHC card. ( A Page 3 1)
4
Turn on the power of the camera recorder.
Set the [POWER] switch to
A
ON
B
. The camera recorder
starts up in Camera mode and is ready for shooting.
5
Adjust the angle of the LCD monitor and viewfinder.
(
A
Page 2 8 )
Shooting
1
Configure the video and audio input settings.
You have to configure video settings such as brightness
adjustment (iris, gain, shutter) and white balance adjustment
in order to start shooting. You also have to adjust the audio
input settings and audio recording level for audio recording.
●
Adjusting the Iris ( A Page 3 9)
●
Setting Gain ( A Page 40)
●
Setting the Electronic Shutter (
A
Page 40)
●
Adjusting the White Balance ( A Page 42)
●
Adjusting the White Shading ( A Page 44)
●
Setting the ND Filter ( A Page 45)
●
Adjusting Audio Input Settings and Recording Level
(
A Page 46)
2
Press the [REC] button to start recording to the SDHC
card.
●
There are two [REC] buttons on the camera recorder and
one on the lens. Any of the [REC] buttons can be used to
start/stop recording by default.
●
During recording, the front and back tally lamps light up in
red.
Memo :
●
Tally lamps can be turned off with [Front Tally]/
[Back Tally] in the [Others] menu. (
A
Page 94)
●
To separately control this camera recorder and other
e
q uipment connected to the [IEEE1 3 94] terminal, you can
configure the setting at [1 3 94 Rec Trigger] in the [Others]
menu. (
A
Page 94)
3
Check the most recently captured images (Clip Review).
Press the [RET] button on the lens to activate the Clip
Review function (
A Page 56). The most recently captured
images are played back on the LCD monitor and viewfinder
screens. After playback, the camera recorder returns to
standby mode (STBY).
* When [Main Menu] B [Camera Function] B [Switch Set] B
[LENS RET] is set to
A
Clip Review
B
( A Page 79)
Basic Shooting Procedures
1
5
2
3
4
[REC] Button
[REC] Button
[POWER] Switch
Back Tally Lamp
Front Tally Lamp