JVC GY-HM600E, Инструкция по эксплуатации

Страница: 69 / 148

Settings and Operation of the Camera
Recorder
1
Set to Camera mode.
(
A
P16 [Operation Modes] )
2 Set [TC/UB]
B
[TC Generator] as follows.
0
Slave device:
Select “Free Run(Ext)”.
0
Master device:
Select “Free Run”.
3
Set LCD monitor or viewfinder to Display 1
screen.
4 Set the master device and run the time
code.
0
When the built-in time code generator is
synchronized with the external time code
data input, the
Z
icon on Display 1 screen
lights up.
0
When time code is not synchronized or time
code input is not available, the
Z
icon goes
out.
.
P 13000K 1/ 100
F1. 6
0
dB
AE
+
6
ND 1 /64
12 :34 : 56
Jan 24 , 2012
00: 00: 00.00
4030 20 10 0
5 . 6f t
Memo :
0
The built-in time code generator will continue
operation even when the master device is
disconnected after synchronization.
0
User’s bit will become data in the master device.
0
While the [TC] terminal is connected, the time
code may be out of synchronization when the
[A/V Set]
B
[Video Set]
B
[HDMI/SDI Out]
setting of the Master device and Slave device is
being changed.
(
A
P107 [ HDMI/SDI Out ] )
Setting Zebra Pattern
When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
.
AE L EVE
L
PUSH AUTO
ZEBRA/5
1
Set the zebra display pattern.
Select the display pattern in [LCD/VF]
B
[Shooting Assist]
B
[Zebra].
2
Specify the brightness (luminance) level
range for displaying zebra pattern.
Specify the upper and lower limits of the
luminance level in [LCD/VF]
B
[Shooting
Assist]
B
[Zebra]
B
[Top] and [Bottom].
Item Settings Options
Top Upper luminance
limit for displaying
[Zebra]
5% - 100%, Over
(in 5 % increments)
Bottom Lower luminance
limit for displaying
[Zebra]
0% - 100% (in 5 %
increments)
3
Display the zebra pattern.
Press the [ZEBRA/5] button to display the zebra
pattern in the specified range.
.
Memo :
0
“Zebra” is assigned to [ZEBRA/5] button in
factory default.
0
“Zebra” can also be assigned to other user
buttons.
(
A
P36 [Assignment of Functions to User
Buttons] )
69
Sh
ooting