JVC GY-HM600E, Инструкция по эксплуатации

Страница: 104 / 148

VF Bright
For setting the brightness of the viewfinder screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 (
R
0)]
VF Contrast
For setting the difference in luminance between the
darkest and brightness areas in the viewfinder
screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (
R
0)]
LCD Contrast
For setting the difference in luminance between the
darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (
R
0)]
LCD Backlight
For setting the brightness of the LCD monitor
backlight.
[Setting Values: Bright,
R
Normal]
LCD Mirror
For specifying the image display method when
facing the LCD monitor.
Select “Mirror” to display the image after laterally
inverting it. (Mirror display)
(
A
P34 [Adjusting the LCD Monitor and
Viewfinder] )
[Setting Values: Mirror,
R
Normal]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
During color bar, menu screen and status
screen display, the “Mirror” setting is disabled.
(
A
P127 [Color Bar Output] )
PEAKING (Playback)
For adjusting the contour level of the playback
image displayed on the LCD monitor or viewfinder.
When “On” is selected, you can use the [PEAKING
+/-] to adjust the level.
[Setting Values: On,
R
Off]
Shooting Assist Item
Focus Assist
For setting whether to add color to the contour of
the focused image upon switching the image to
black-and-white.
[Setting Values: On,
R
Off]
9 Type
For specifying the operation when the [FOCUS
ASSIST/1] button is pressed.
(
A
P49 [Focus Assist Function] )
0
ACCU-Focus:
Enables the Focus Assist and ACCU-Focus
(forced focus) functions. The depth of field of the
object becomes shallower to enable easier
focusing. The ACCU-Focus function switches
automatically to “Off” after about 10 seconds.
0
Normal:
Enables only the Focus Assist function. The
focused area is displayed in color to enable
easier focusing. Display color can be specified
with [Color].
[Setting Values: ACCU-Focus,
R
Normal]
9 Color
For setting the display color of the focused area
when Focus Assist is activated.
[Setting Values:
R
Blue, Green, Red]
Zebra
For selecting whether to display zebra patterns at
the bright areas of the subject.
Select “On” to display zebra patterns or “Off” to
hide.
[Setting Values: On,
R
Off]
9 Top
For setting the maximum luminance level for the
zebra pattern display.
[Setting Values: Over, 100% to 5% (in 5%
increments)] (
R
80%)
9
Bottom
For setting the minimum luminance level for the
zebra pattern display.
[Setting Values: 100% to 0% (in 5% increments)]
(
R
70%)
Memo :
0
The relation between Top and Bottom is such
that Top>Bottom always holds. To maintain this
relation when setting Top, the Bottom value is
automatically corrected.
104
Menu
Display and
D
etailed
S
etti
ngs