JVC GY-HM180E Скачать руководство пользователя страница 98

Страница: 98 / 194

AE Speed

For setting the convergence speed during AE (Auto

Exposure).

[Setting Values:

Fast, Middle, Slow]

AGC Limit

For setting the maximum gain value of “AGC”,

which electrically boosts the sensitivity level

according to the brightness automatically.

[Setting Values: 24dB, 18dB,

15dB, 12dB, 6dB]

Auto Iris Limit (OPEN)

For setting the limit value of the OPEN end when

auto iris is enabled.

[Setting Values: F4, F2.8,

F2, F1.8, F1.6, F1.4,

F1.2]

Auto Iris Limit (CLOSE)

For setting the limit value of the CLOSE end when

auto iris is enabled.

[Setting Values: F11, F8,

F5.6, F4]

EEI Limit

For setting the shutter speed control range when

the Automatic Shutter mode (EEI) is enabled.

[Setting Values: 4F-stop,

3F-stop, 2F-stop]

Smooth Trans

For setting the shock reduction function, which

slows down the sudden change when switching

with the [GAIN] or [WHT.BAL B/A/PRST] switch.

[Setting Values: Fast, Middle, Slow,

Off]

Memo :

This function is disabled when AGC is operating.

FAW

For setting the position in the white balance switch

[WHT.BAL B/A/PRST] to assign the FAW (Full

Auto White Balance) function.

[Setting Values: B, A, PRST,

None]

GAIN L, GAIN M, GAIN H

For setting the gain value of each position on the

[GAIN] selection switch.

The setting is fixed at “AGC” in the Full Auto mode.

In addition, the sensitivity setting in Lolux is used.

(

P100 [ Lolux ] )

[Setting Values: AGC, 24dB, 21dB, 18dB, 15dB,

12dB, 9dB, 6dB, 3dB, 0dB]

(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN

H: 12dB)

Dynamic Zoom

For setting whether to enable the dynamic zoom

function.

Off:

Enables only the optical zoom (1x to 12x).

On:

Enables the dynamic zoom (12x to 24x) in

addition to the optical zoom.

[Setting Values:

Off, On]

Memo :

When [System] is set to “4K”, this item is fixed at

“Off” and cannot be selected.

Handle Zoom Speed L/Handle Zoom Speed

M/Handle Zoom Speed H

For setting the zoom speed for each position on the

[ZOOM L/M/H] zoom speed selection switch.

The larger the value the faster the zoom speed.

Selecting “Off” disables the zoom operation on the

handle.

[Setting Values: Off, 1 to 7]

(Default Values Handle Zoom Speed L: 1, Handle

Zoom Speed M: 4, Handle Zoom Speed H: 7)

Zoom Ring

For assigning the zoom or iris adjustment to the

zoom ring.

[Setting Values:

Zoom, Iris]

Iris Dial

For assigning the iris, shutter or AE level

adjustment to the iris dial.

If “Iris/Shutter/AE Level” is selected, the iris dial that

is normally used to adjust the iris will be used to

adjust the shutter speed and the AE level when the

[SHUTTER] button and [AE LEVEL] button are

pressed respectively. After which, the iris dial

resumes its iris operation.

[Setting Values: Iris/Shutter/AE Level, AE Level,

Shutter,

Iris]

Camera Function Menu

Menu

Display and

etailed

etti
ngs

Содержание GY-HM180E



































































































































































































Результаты поиска

Содержание GY-HM180E

Отзывы:

Бренды по названию

Популярные бренды

JVC GY-HM180E, Инструкция по эксплуатации

Результаты поиска

Содержание GY-HM180E

Отзывы:

Бренды по названию

Популярные бренды