JVC GY-HM170E, Инструкция по эксплуатации

Страница: 118 / 212

9
HDMI TC
For setting whether to superimpose time code to
the [HDMI] terminal.
0
This item is selectable when [HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”.
0
This item is selectable when [HDMI Out] is set
to “On”.
[Setting Values: On,
R
Off]
Memo :
0
Set to “Off” if connecting to a device that does
not support HDMI TC.
SD Aspect
For setting the style of displaying images with a
16:9 aspect ratio on a 4:3 aspect ratio screen.
0
Side Cut:
Displays image with the left and right sides cut
off.
0
Letter:
Displays as a wide image with the top and
bottom blackened.
0
Squeeze:
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter,
R
Squeeze]
Memo :
0
When [Record Format]
B
[System] is set to
“SD”, and [Record Format]
B
[SD Aspect] is set
to “4:3”, “---” is displayed and selection is
disabled.
(
A
P123 [ System ] )
0
[System]
B
[Record Set]
B
[Record Format]
B
[System] is set to “SD”, “Squeeze” and “Letter”
can be selected.
SD Set Up
For selecting whether to add a setup signal to the
video signal output from the [AV] output terminal.
Setup signals are added when “7.5%” is selected.
[Setting Values: 7.5%, 0.0%]
(Default values: 7.5% (U model), “0.0%” (E model))
Memo :
0
Depending on the menu settings of the camera
recorder and the condition of the cable
connected to it, the setup signal setting may be
fixed at “0.0%”. “0.0%” is displayed in gray in this
case.
0
When [System]
B
[Record Set]
B
[Record
Format]
B
[Frame Rate] is set to “50p” or “50i”,
“---” is displayed and selection is disabled.
Audio Set Item
CH1 INT
For selecting either the built-in microphone or the
[AUX] terminal as the CH1 audio input signal.
This item is selectable if the [CH-1] audio input
signal selection switch is set to “INT”
O
, and a
microphone is connected to the [AUX] terminal.
0
Int. Mic L:
Sets the left channel (Lch) of the built-in
microphone as the CH1 audio input signal.
0
AUX L:
Sets the [AUX] terminal as the CH1 audio input
signal.
[Setting Values: Int. Mic L,
R
AUX L]
Memo :
0
If the [AUX] terminal is not connected, this item
is fixed at “Int. Mic L”.
0
When the [CH-1] audio input signal selection
switch is set to a value other than “INT”, “---” is
displayed and selection is disabled.
0
If the handle unit is not connected, the state of
the [CH-1] audio input signal selection switch is
equivalent to “INT”.
CH2 INT
For selecting either the built-in microphone or the
[AUX] terminal as the CH2 audio input signal.
This item is selectable if the [CH-2] audio input
signal selection switch is set to “INT”
O
, and a
microphone is connected to the [AUX] terminal.
0
Int. Mic R:
Sets the right channel (Rch) of the built-in
microphone as the CH2 audio input signal.
0
AUX R:
Sets the [AUX] terminal as the CH2 audio input
signal.
[Setting Values: Int. Mic R,
R
AUX R]
Memo :
0
If the [AUX] terminal is not connected, this item
is fixed at “Int. Mic R”.
0
When the [CH-2] audio input signal selection
switch is set to a value other than “INT”, “---” is
displayed and selection is disabled.
0
If the handle unit is not connected, the state of
the [CH-2] audio input signal selection switch is
equivalent to “INT”.
118
A/V Set Menu
Menu Display and Detailed Settings