JVC GY-HM150U, Инструкция по эксплуатации

Страница: 70 / 104

66
Menu Display and Detailed Settings
Switch Set Item
* Default values are indicated in bold characters.
Camera Function Menu
(continued)
Item Setting Values Function
FAW None
PRESET
A
B
For assigning the FAW (Full Auto White Balance) function to a position on the [WHT.BAL]
selection switch.
The white balance mode is fixed at
A
FAW
B
when the [FULL AUTO] button of the camera recorder
is set to
A
ON
B
.
None : FAW function is not assigned.
PRESET : Assigns FAW to the PRESET position.
A : Assigns FAW to the A position.
B : Assigns FAW to the B position.
GAIN L
GAIN M
GAIN H
AGC, 1 8 dB, 15dB,
12dB, 9dB, 6dB, 3 dB,
0dB
For setting the gain value of each position on the [GAIN] selection switch.
This is fixed at
A
AGC
B
when the [FULL AUTO] button of the camera recorder is set to
A
ON
B
.
(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB)
Zoom Speed -2, -1
Normal
1
For setting the speed of zoom operation with the set lever (on the LCD monitor) and remote
control.
A
-2
B
is the slowest setting and
A
1
B
is the fastest setting.
USER1
USER2
LOLUX/3
C.REVIEW/4
ZEBRA/5
REC/6
By assigning one of the following functions to each of the [USER1]/[USER2]/[LOLUX/ 3 ]/[C.REVIEW/4]/[ZEBRA/5]/[REC/
6] buttons, these buttons can be used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable only in the Camera mode.
(Default values USER1: Focus Assist, USER2: TC/UB, LOLUX/3: Lolux, C.REVIEW/4: Clip Review, ZEBRA/5:
Zebra, REC/6: Rec)
Memo :
●
The [REC/6] button is set to
A
Rec
B
by default, and can be used to start/stop recording. The
A
Rec
B
function can only
be assigned to the [REC/6] button.
Setting Values Description
None No function is assigned.
Load File Assigns the function of [Load Scene File] in the [Setup File Manage] menu. (
A
Page 75)
OK Mark Assigns the function of appending/deleting OK marks while recording a clip. This function
operates during shooting. (
A
Page 41)
Clip Cutter Trig Assigns the function of splitting clips freely during recording. (
A
Page 41)
Memo :
●
This item cannot be used when [Slot Mode] is set to
A
Backup
B
. (
A
Page 64)
●
This item cannot be used when [Rec Mode] is set to a value other than
A
Normal
B
or
A
Pre
Rec
B
. (
A
Page 64)
Backup Trig Assigns the function of [Backup Rec] in the [Slot Mode] menu. (
A
Page 64)
AE Area Assigns the function of [AE Area] in the [Camera Function] menu. (
A
Page 65)
Clip Review Assigns the Clip Review function. (
A
Page 2 8 )
Rec Stop Assigns the function to stop recording. This function operates during recording only.
Memo :
●
When the [Rec Mode] menu is set to
A
Clip Continuous
B
or
A
Frame Rec
B
, it is useful to use
this as the stop button. (
A
Page 64)
Zebra Assigns the function of [LCD/VF] menu
B
[Shooting Assist]
B
[Zebra]. (
A
Page 70)
Lolux For switching the low-light shooting mode ON or OFF.
Tele Macro Assigns the function of [Tele Macro] in the [Camera Function] menu. (
A
Page 65)
TC/UB Opens the [TC/UB] menu directly. (
A
Page 69)
Bars Assigns the function of [Bars] in the [Camera Function] menu. (
A
Page 65)
Focus Assist Assigns the function of [LCD/VF] menu
B
[Shooting Assist]
B
[Focus Assist]. (
A
Page 70)
GY-HM150U.book Page 66 Monday, September 5, 2011 1:48 AM