JVC GY-HM150U, Инструкция по эксплуатации

Страница: 43 / 104

39
Applicable to: Camera mode, Media mode
1
Connect the headphone.
Connect the headphone to the headphone ( ) jack.
2
Set the headphone sound to mixed sound or stereo
sound.
Set using [Audio Monitor] in the [A/V Out] menu.
(
A
Mix
B
/
A
Stereo
B
) (
A
Page 7 3 )
3
Adjust the headphone’s audio level. (Linked to built-in
speaker)
Operate with the [ADJ./VOL.] knob.
Memo :
●
The built-in speaker is usable only in the Media mode. Audio
is not output from the built-in speaker during Camera mode.
●
Audio level in the Camera mode and Media mode can be
adjusted separately.
●
When in the Media mode, the volume of the headphone and
speaker are adjusted at the same time.
●
The built-in speaker cannot be used when the [HDMI]
terminal, [A/V Out] terminal, or headphone jack is
connected.
Applicable to: Camera mode
Displaying the Time Code/User ’ s Bit
Menu setting
1
Set [LCD/VF] menu
B
[Status Display]
B
[TC/UB] to
A
TC
B
or
A
UB
B
. (
A
Page 72)
● A
TC
B
: Displays the time code.
● A
UB
B
: Displays the user ’ s bit.
Recording the Time Code
The time code of the camera recorder ’ s built-in time code
generator as well as user ’ s bit can be recorded. The time
code generator comes in the preset and regeneration
modes. When in the preset mode, you can set the time code
and user
’ s bit freely. (
A
Page 40)
Recording time code and user ’ s bit in the preset
mode
1
Set [TC Generator] in the [TC/UB] menu to
A
Rec Run
B
or
A
Free Run
B
. (
A
Page 69)
● A
Rec Run
B
:The time code operates in the run mode only
during recording.
● A
Free Run
B
:The time code operates in the run mode at all
times.
Recording time code in continuation of the
recorded time code on the SDHC/SDXC card
1
Set [TC Generator] in the [TC/UB] menu to
A
Regen
B
.
(
A
Page 69)
Memo :
●
When recording is stopped and the SDHC/SDXC card is
removed, the time code will be displayed as follows.
A
Rec Run
B
: Time code generated when the recording
was last stopped.
A
Regen
B
: Sets to 00:00:00:00.
A
Free Run
B
: Operates in the run mode at all times.
Monitoring Audio Sound
Using a Headphone
REMOTE
Headphone Jack
DC
OPEN
REC
PUSH
OI S
SHUTTER
AE ±
ADJ
./ V
O
L.
CLOSE
ACCESS
CAM
MEDIA
[ADJ./VOL.]
Knob
Time Code Recording
Setting
Time Code
GY-HM150U.book Page 39 Monday, September 5, 2011 1:48 AM