JVC GY-HM100, Инструкция по эксплуатации

Страница: 60 / 76

60
Menu Screen s
Menu Screen s of the Video
Shooting Mode (continued)
Item Description
Items that are shaded ( ) are common to all modes.
S ettings with the
R
mark are default values.
CAMERA PR
OCE
SS
COLOR MATRIX For setting the COLOR MATRIX.
OFF : Turns the function OFF.
R
S TANDARD : S ets a normal color matrix.
CINEMA VIVID COLOR : S ets to a vivid cinema color.
CINEMA S UBDUED COLOR : S ets to a su b dued cinema color.
COLOR GAIN A separate screen is displayed. (
A
Page 3 9)
Use this item to adjust the video signal color level.
OFF : S ets the video to b lack and white.
Increase the num b er : Makes the colors more dense.
Decrease the num b er : Makes the colors less dense.
OFF, MIN (-5), -4 to
R
NORMAL (0) to +4, MAX (5)
PRE S ET TEMP. For setting the b asic color temperature when the WHT.BAL. switch is in the PR S T(PRE S ET)
position.
R
3 200K : S ets the b asic color temperature to 3 200K. (Use for light sources with a low color
temperature, such as halogen lamps.)
5600K : S ets the b asic color temperature to 5600K. (Use for light sources with a high color
temperature, such as sunlight.)
Memo :
●
This item does not function when [FAW] is set to [PRE S ET].
WHITE PAINT<R> A separate screen is displayed. ( A Page 3 6)
Use this item to adjust the R (red) component when in the AWB (Auto White Balance) mode.
Increase the num b er : S trengthens the red.
Decrease the num b er : Weakens the red.
MIN (-15), -14 to
R
0 to 14, MAX (15)
Memo :
●
This item is availa b le when the WHT.BAL. switch is set to A or B. S ettings can b e made for A, B
individually. (When PRE S ET is set, this cannot b e selected.)
●
When you press the AWB (Auto White Balance) b utton and readjust the white b alance, [WHITE
PAINT<R>] b ecomes “ 0 ” .
WHITE PAINT<B> A separate screen is displayed. ( A Page 3 6)
Use this item to adjust the B ( b lue) component when in the AWB (Auto White Balance) mode.
Increase the num b er : S trengthens the b lue.
Decrease the num b er : Weakens the b lue.
MIN (-15), -14 to
R
0 to 14, MAX (15)
Memo :
●
This item is availa b le when the WHT.BAL. switch is set to A or B. S ettings can b e made for A, B
individually. (When PRE S ET is set, this cannot b e selected.)
●
When you press the AWB (Auto White Balance) b utton and readjust the white b alance, [WHITE
PAINT<B>] b ecomes “ 0 ” .
FAW For setting the positions to assign the FAW (Full Auto White Balance) function to the WHT.BAL.
switch. (Fixed at FAW when in FULL AUTO mode
A
)
R
NONE : The FAW function is not assigned.
A : Assigns FAW to the A position.
B : Assigns FAW to the B position.
PRE S ET : Assigns FAW to the PRE S ET position.
M9H7_EN_001D.book Page 60 Thursday, August 26, 2010 11:51 AM