EN
9
Master Page: Right-start
A
U
TO
MA
TIC DEMONSTRA
TION
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
䡲
Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “
A
” or “
M
” and no cassette is in
the camcorder.
䡲
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
䡲
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
To cancel Automatic Demonstration
1
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press
MENU
. The Menu Screen appears.
4
Press
+
or
–
to select “
s
SYSTEM”, and press
SET/SELECT
. The SYSTEM Menu appears.
5
Press
+
or
–
to select “DEMO MODE”, and press
SET/SELECT
. The Sub Menu appears.
6
Press
+
or
–
to select “OFF”, and press
SET/
SELECT
.
7
Press
+
or
–
to select “
B
RETURN”, and press
SET/
SELECT
twice. The normal screen appears.
NOTE:
Slide the lens cover down to see the actual changes
of the Automatic Demonstration activated on the
LCD monitor or viewfinder.
Automatic Demonstration
ST
M
SY
E
DE
M
–
MO
DE O
N
O
OFF
Power Switch
Lock Button
MENU Button
Sub Menu
SET/SELECT Button
+, – Button
GR-DVP9US.book Page 9 Wednesday, January 22, 2003 5:35 PM
