JVC GR-DVL9000, Инструкция по эксплуатации

Страница: 18 / 92

18
EN
GETTING STARTED
(Cont.)
T W
Remote Control Unit
You can use the RM-V711U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or
powerful lighting.
Installing The Battery
The RM-V711U uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3 RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(
Z
pg. 2).
Operation Buttons
(
Z
pg. 54, 62, 70, 71)
Up Button (
Z
pg. 54)
INSERT Button (
Z
pg. 71)
Down Button (
Z
pg. 54)
AUDIO MONITOR Button
(
Z
pg. 70)
MBR SET Button (
Z
pg. 64)
A. DUB Button (
Z
pg. 70)
START/STOP Button (
Z
pg. 71)
PAUSE IN connector (
Z
pg. 65)
EFFECT ON/OFF Button
(
Z
pg. 55)
EFFECT Button
(
Z
pg. 55)
FADE/WIPE Button
(
Z
pg. 66)
Left/Right Buttons
(
Z
pg. 54)
SLOW Rewind/Forward
Buttons (
Z
pg. 53)
SHIFT Button (
Z
pg. 54, 64)
DISPLAY Button (
Z
pg. 62)
Zoom Buttons (
Z
pg. 54)
Knob
R.A. EDIT Buttons (
Z
pg. 67)