background image

EN

 

43

Master Page: Right

If Program AE with special effects (

pg. 33) is 

engaged, certain modes of Program AE with 
special effects are disabled during Snapshot 
recording. In such a case, the icon blinks.

If 

SNAPSHOT

 is pressed when “DIS” is set to 

“ON” (

pg. 36), the Stabilizer will be disabled.

During playback as well, all snapshot modes 
except Nega mode are available when 

COPY” is set to “OFF” in VIDEO Menu. 

(

pg. 40) However, the shutter sound is not 

heard.

During Snapshot recording, the image displayed 
in the viewfinder may be partially missing. 
However, there is no effect in the recorded image.

When a cable is connected to the AV connector, 
the shutter sound is not heard from the speaker, 
however it is recorded onto the tape.

Motor Drive Mode

Keeping 

SNAPSHOT

 pressed in step

5

 provides an 

effect similar to serial photography. (Interval 
between still images: approx. 1 second)

The Motor Drive mode is disabled when “REC 
SELECT” is set to “

/

”. (

pg. 39)  

Once the camcorder is set, the camcorder operator 
can become part of the scene in a more natural way, 
adding the final touch to a memorable picture.

1

Set the Power Switch to “

M

” while pressing down 

the Lock Button located on the switch.

2

Open the LCD monitor fully, or pull out the 
viewfinder fully.

You can tilt the LCD monitor upward to 180° 
so that it faces forward and view yourself while 
self-recording with the viewfinder pushed 
back.

3

Set “SELF-TIMER” to 
“ON

. (

pg. 31, 36)

4

To engage the Self-Timer 
for video recording, press 
the Recording Start/Stop 
Button. 

After 15 seconds, the 
beep sounds and video 
recording starts.

5

To stop Self-Timer 
recording, press the 
Recording Start/Stop 
Button again.

The camcorder re-enters 
Record-Standby mode. 

OR

5

Press 

SNAPSHOT

After 15 seconds, the beep sounds and 
snapshot recording starts. After that, the 
camcorder re-enters Record-Standby mode.

6

To end Self-Timer recording, select “OFF” in 
step

3

.

Self-Timer

   

NU

 

L

 MA

   

 

 

A

  

   

 

 

 

 

  

 

 

 

 

 

 

  O

ME

L

 

– T I

 

SE F

R

 

F

F

 

 

 

   

 

 

 

   

 

   

 

 

 

 

 

 

 

   

   

 

 

     

 

   

 

 

 

 

 

 

     

   

   

 

 

 

   

 

   

 

 

 

 

 

 

     

   

   

 

     

 

   

 

 

 

 

 

 

 

 

   

   

 

 

     

     

 

 

 

 

 

 

 

 

   

   

 

 

     

     

 

 

 

 

 

 

 

 

   

   

 

 

     

     

 

 

 

 

 

 

 

 

       

   

 

N

RETUR

ON

Self-Timer indication

AD

V

A

NCED FE

A

TURE

S

CONTINUED ON NEXT PAGE

GR-DV801US.book  Page 43  Wednesday, January 22, 2003  5:39 PM

Содержание GR-DV801

























































































Отзывы: