background image

EN 

55

5

Press the 

w

 

e

 button to select “OFF”, “B/W”,

“SEPIA”, or “NEGA”.

•Press the 

w

 

e

 button repeatedly to cycle

through the following modes:
OFF:

No special effects.

B/W:

Converts a picture from color to
black and white.

SEPIA:

Gives a picture a sepia tone,
creating a retrospective look.

NEGA:

Gives a picture a negative film
effect.

6

Press the 

r

 

t

 button to select “NEXT”, and

then press the EXE button.

•“NOW EDITING” appears, then FILE screen

will appear.

5–7

7

Press the 

r

 

t

 button to select “OVERWRITE”

or “SAVE”, and then press the EXE button.

•It is not possible to overwrite the file when

the remaining memory of the Memory card is
not enough.

•You can also add date or calendar informa-

tion to a file. (

Z

 pg. 56, 57)

•You can print the file that you have added

special effects. (

Z

 pg. 60)

8

Select “STILL PB” with the MODE switch, and
then confirm that the file has been saved.
(

Z

 pg. 31)

EDIT

EFFECT

DATE
NEXT
RETURN

B/W
OFF

EXE

EXE

NOW EDITING

FILE

PRINT

OVERWRITE

SAVE
CANCEL

EXE

EXE

EXE

EXE

8

Содержание GC-QX3U





































































































































































Отзывы: