When the unit is not working properly
Resetting this Unit
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it from
functioning properly. In that case, perform the steps below to reset this unit.
(The recorded data will not be erased.)
1
Open the terminal cover.
0
Remove the power cord and all connecting cables.
2
Close the LCD monitor to turn off this unit.
3
Press the Reset button gently using an object with pointed tip.
.
Reset Button
Charging
Unable to charge the battery.
When the battery pack is fully charged, the lamp does not light up.
Be sure to charge using the supplied AC adapter. Malfunction in the unit that
occurred due to the use of an AC adapter other than the one provided is not
included in the warranty.
Check the connection, then disconnect and reconnect the charging adapter
cable.
Charging cannot be performed under low or high temperature environments.
Charge under the room temperature range of 10°C to 35°C. (Under
environments beyond the temperature range, charging may stop to protect
the battery pack.)
Using a non-original AC adapter may result in damage to this unit. Be sure
to use an original AC adapter.
Charging is not possible when the video recording mode with progressive
(50p) recording or Wi-Fi function is in used.
The remaining battery display is not correct.
If this unit is used for long periods of time in high or low temperatures, or if
the battery pack is repeatedly charged, the amount of remaining battery may
not be displayed correctly.
The battery runs out quickly even after charging.
Be sure to charge using the supplied AC adapter. Malfunction in the unit that
occurred due to the use of an AC adapter other than the one provided is not
included in the warranty.
The performance of the battery will drop temporarily when the temperature
is -10°C to 0°C, this will cause the remaining recording time to shorten.
When the recording time becomes extremely short even when the battery is
fully charged, the battery needs to be replaced. For details on replacing the
built-in battery (subject to a fee), consult the nearest JVC service center.
Troubleshooting
167
Содержание Everio R GZ-RX601
Страница 1: ...CAMCORDER C6B7_RX605_EU_EN Detailed User Guide GZ RX605 GZ RX601 ...
Страница 80: ...Windows 7 1 Click the start button 2 Right click Computer 3 Click Properties Copying 80 ...
Страница 108: ...6 Operate from a smartphone 0 How to operate from a smartphone Using Smartphone Applications A p 114 Using Wi Fi 108 ...
Страница 179: ...0318TOH SW MT C6B 2018 JVC KENWOOD corporation ...