JVC Everio GZ-MG40, Инструкция по эксплуатации

Страница: 53 / 64

REFERENCES
EN
53
RE
FER
EN
CES
MasterPage: Menu_Right
The recorded image is white
●
Shutter speed is set to NIGHTALIVE or slow
speed.
H
NIGHTALIVE and slow speed are only for use in
dark conditions. (
墌
pg. 35)
Playback
Playback cannot be performed.
●
Recording medium is not selected properly.
H
Select the recording medium. (
墌
pg. 21, 48, 49)
●
Playback starts, but there is no picture on the
connected TV.
H
Set the TV's input mode or channel appropriate
for video playback.
The same image is displayed for a long time
during video playback, or motion is choppy.
●
If the surface of the SD card is damaged, it makes
difficult to read data and these phenomena will
appear. This camera will make all possible efforts
to read data, but when such a state continues for
some time, and further playback is impossible, it
will stop automatically.
H
It is recommended to run check disk regularly on
the PC, on condition that there is no data on the
hard disk of the camera.
Advanced features
The focus does not adjust automatically.
●
Focus is set to the manual mode.
H
Set focus to the automatic mode. (
墌
pg. 33)
●
The lens is dirty or covered with condensation.
H
Clean the lens and check the focus again.
(
墌
pg. 56)
The color of the image looks strange.
●
The light source or the subject does not include
white. Or there are various different light sources
behind the subject.
H
Try manual white balance adjustment. (
墌
pg. 34)
The recorded image is too dark.
●
Shooting was performed under backlit conditions.
H
Try backlight compensation (
墌
pg. 31) or manual
exposure. (
墌
pg. 32)
The recorded image is too bright.
●
The subject is too bright.
H
Try manual exposure. (
墌
pg. 32)
White balance setting cannot be activated.
●
The sepia (SEPIA) or monotone (MONOTONE)
mode is activated.
H
Turn off the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white
balance. (
墌
pg. 36)
The black & white fader does not work.
●
The sepia (SEPIA) or monotone (MONOTONE)
mode is activated.
H
Turn off the sepia (SEPIA) or monotone
(MONOTONE) mode. (
墌
pg. 37)
The image looks like the shutter speed is too
slow.
●
When shooting in the dark, the unit becomes
highly sensitive to light when [GAIN UP] is set to
[ON].
H
If you want the lighting to look more natural, set
[GAIN UP] to [OFF]. (
墌
pg. 50)
The continuous shooting speed of still
images is slow.
●
The continuous shooting speed will drop when
repeatedly making continuous shots, when using
certain recording medium, or under certain
recording conditions. (
墌
pg. 28)
Other problems
The power/charge lamp on the camera does
not light during charging.
●
Charging is difficult in places subject to extremely
high/low temperatures.
H
To protect the battery, it is recommended to
charge it in places with a temperature of 10°C to
35°C (50°F to 95°F). (
墌
pg. 57)
The data process is too slow after the power
is switched on or the mode is changed.
●
There is a large number of still images (approx.
1,000 or more) stored in the recording medium.
H
Copy the stored files to a PC, and delete them
from the recording medium.
[SET DATE/TIME!] appears.
●
The built-in clock's rechargeable lithium battery is
discharged.
●
The previously set date/time is erased.
H
Connect the camera to an AC outlet using the AC
adapter for over 24 hours to charge the clock's
lithium battery. Then set the date/time. (
墌
pg. 18)
Files cannot be deleted.
●
Files are protected.
H
Remove protection from the files and delete them.
(
墌
pg. 38, 50)
When the image is printed from the printer, a
black bar appears at the bottom of the
screen.
●
This is not a malfunction.
H
By recording with DIS activated, this can be
avoided. (
墌
pg. 50)
CONTINUED ON NEXT PAGE
M5E3US.book Page 53 Wednesday, September 7, 2005 4:38 PM