JVC Everio GZ-MC200US, Руководство по обслуживанию

Страница: 22 / 38

1-22 (No.YF059)
3.2.2 ASSEMBLY/DISASSEMBLY OF CABINET PARTS AND ELECTRICAL PARTS
z Disassembly procedure
NOTE1a:
When removing, remove the four SCREWS (1-4) first to
avoid damage or deformation of the ARM (COVER) AS-
SEMBLY and the STAY (COVER) ASSEMBLY.
During the procedure, be careful with opening and closing of
the BATTERY/ CF CARD COVER.
Also, be careful not to damage the parts with the ARM
(COVER) ASSEMBLY or the STAY (COVER) ASSEMBLY.
NOTE1b:
Be careful in handling the SPACER.
Attach the SPACER to adjust the edge of CN302.
NOTE1c:
When attaching, be careful not to pinch the WIRE.
Pay special attention on the inside of the TRIPOD and the
BATTERY wiring.
NOTE2a:
When removing the COVER(FR.)ASSEMBLY, remove the
SCREW (No.8) first for the smooth removal of other parts.
NOTE2b:
When removing, be careful not to lose the part (SHAFT).
NOTE4a:
During the procedure, be careful not to damage the CON-
NECTOR or cut/break the WIRE.
NOTE4b:
When removing, be careful in handling the SPACER.
NOTE4c:
Be careful with the wiring and the affixing the SPACER.
NOTE4d:
When attaching, be sure to place the FPC WIRE inside.
NOTE4e:
When attaching, lift the part (ARM) upward.
NOTE4f:
During the procedure, be careful not to deform the part
(ARM) or damage other parts.
NOTE5a:
Peel off the SPACER before removing the WIRE (GREEN)
of CN5b.
NOTE5b:
Be careful with the positions of the SCREWS that are to be
removed.
NOTE5c:
During the procedure, be careful with the grease.
NOTE5d:
When attaching, connect the SPACER to the CONNECTOR
(CN5a, b), and place the SPACER inside by folding it.
NOTE6:
When attaching, be careful with the wiring,
NOTE7:
When removing, turn the CAMERA ASSEMBLY and re-
move the total of four SCREWS, two SCREWS at a time.
z Destination of connectors
STEP
No.
PART NAME
Fig.
No.
POINT NOTE
[1]
[2]
[1]
[3]
[4]
[5]
[6]
[7]
GRIP LOWER ASSY
COVER(FR.) ASSY
GRIP LOWER ASSY
COVER(TOP)
REG PWB ASSY
CF ASSY
PLATE(ROTALY)
MONITOR ASSY
FA1
FA2
FA3
FA4
FA5-1
FA5-2
FA5-3
FA6
FA7-1
FA7-2
FA8
NOTE1a
NOTE2a,b
NOTE1b,c
-
NOTE4a
NOTE4b,c
NOTE4d
NOTE5a,b,c,d
NOTE6
NOTE6
NOTE7
2(S1a),2(S1b)
S2a,S2b,S2c,S2b
L1a, L1b,2(S1c),CN1a,b
S3a,S3b,3(S3a)
CN4a,b,2(S4),CN4c,d,e,f,g,h
-
-
CN5a,b,2(S5a),S5b
3(S6)
-
4(S7)
CN.NO. CONNECTOR
PIN
NO.
CN1a REG CN305 OPE3 - 6
CN1b REG CN307 BATT_TERM - 6
CN4a REG CN301 ANALOG CN206 10
CN4b REG CN302 ANALOG CN207 27
CN4c REG CN306 LCD SUB CN7802 30
CN4d REG CN309 CF CN9904 20
CN4e REG CN303 ANALOG CN208 30
CN4f REG CN310 CF SW - 2
CN4g REG CN304 OPE2 - 12
CN4h REG CN308 CDS, DIGITAL CN5103,103 11
CN5a CF CN9901 CF SUB CN9801 27
CN5b CF CN9902 CF SUB CN9802 27