(No.YD075)1-23
5.4.6 When it is displayed in FDP, 'RESET'
When the following operations are carried out, "RESET" is displayed in the FDP of the main body.
(1) When the "POWER" button and the "STOP" button of the main body are pressed at the same time
(2) When the code "9B" is transmitted to the main body by using JIG remote control unit
(3) When transmission failure occurs between the main CPU and the DVD host CPU due to defect
If "RESET" is displayed in the FDP after the power code is plugged into the outlet, check the followings.
• The peripheral circuitry of each microcomputer
• Whether the wire between the DVD drive and the board is properly connected
• Whether the wire between the main board and the digital board is properly connected