JVC DR-M1SL, Руководство по обслуживанию

Страница: 10 / 56

1-10 (No.XA013)
SECTION 5
TROUBLESHOOTING
5.1 JIG Mode
The following remote control units are required to set and cancel JIG mode.
For setting : a remote control unit attached to DR-M1SL.
For cancellation : JIG remote control unit (part number : PTU94023A)
When the main body is set to JIG mode and when the main body is under JIG mode, the remote control unit attached to DR-M1SL
operates only in "Remote Control Code 1". Since DR-M1SL is in "Remote Control Code 3" when it is shipped and just after its batteries
are changed, "Remote Control Code 3" needs to be changed to "Remote Control Code 1."
< Changing Remote Control Code >
(1) Switch TV/CABLE/SAT/DVD Switch to "DVD"
(2) Press the numeric button "1" of the remote control unit while pressing the "SET UP" button of the remote control unit. Then,
press the "ENTER" button, and then release the "SET UP" button.
(3) Press the "PLAY" button of the main body for five seconds or longer while the main body is in stand-by mode, and a current
remote control code of the main body is displayed in FL indicator of the main body.
(4) While keeping the state of (3), press the "STOP" button of the remote control unit toward the main body.
(5) When FL indicator displays "DVD1," it means that the Remote Control Code has been changed to "1."
Custom code
43:A Code
53:B Code
6F:C Code
7F:D Code
Data code
Initial mode
RM-SDR
DVD RECORDER
Remote control unit
attached to DR-M1SL
JIG remote control unit
3
JIG remote control unit
[Data transmission]
Set the data code,
and then press the
" " button.
*DR-M1SL has remote control codes of 1, 2, 3, and 4.
*The remote control codes "DVD 1, 2, 3, and 4" of DR-M1SL are the same as the remote control codes
"A, B, C, and D" of video cassette recorders manufactured in JVC.
(1)
(2)b
(2)c
(2)a
(4)
(3)
(3),(5)
"(2) a-c" shows the order of pressing the buttons.
DVD 1