JVC DM-NC40 Скачать руководство пользователя страница 4

Страница: 4 / 60

Video/Audio codec

The unit is equipped with both encoding and

decoding features.

The unit is also equipped with an echo cancel-

ler feature.

High-picture quality MPEG-4 codec

• Encoding up to 2Mbps

• 30fps video display at 352

240 resolution

PinP (Picture-in-Picture) feature

Two camera video images can be combined

for display on the PC or monitor.

Built-in CF (Compact Flash) slot

Synchronizes with the alarm for recording of

video images to a CF card (not included).

(JPEG images only)

ISMA streaming

ISMA-compliant video and audio streaming.

Contact the nearest JVC-authorized service

agent for details concerning ISMA-compliant

players.

External control terminal

Control devices such as monitoring camera

system, etc.

Unicast and multicast transmission

Supports unicast and multicast for various sys-

tem solutions.

(Up to 5 streams for unicast)

Features

How to view this manual

■

Symbols used

Items concerning the operations of this product are described.

References concerning the usage, restrictions, etc. of this product are described.

Reference pages and reference items are indicated.

■

Button names in operation procedures are enclosed using [ ].

Example: Menu button

→

[Menu]

■

About the contents of this manual

●

strictly prohibited.

●

Windows is a registered trademark of Microsoft Corporation in the U.S.

●

All other product names used in this manual are trademarks or registered trademarks of their respective

companies. Please note that marks such as ™, ®, ©, etc. have been omitted in this manual.

●

Illustrated designs, specifications and other contents of this manual are subject to change without prior

notice.

Note

Memo

Thank you for purchasing this JVC product. Before operating this unit, please read this instructions carefully
to ensure the best possible performance.

These instructions are for DM-NC40U.

Содержание DM-NC40





























































Результаты поиска

Содержание DM-NC40

Отзывы:

Похожие инструкции для DM-NC40

Бренды по названию

Популярные бренды

JVC DM-NC40, Инструкция по эксплуатации

Результаты поиска

Содержание DM-NC40

Отзывы:

Похожие инструкции для DM-NC40

Бренды по названию

Популярные бренды