JVC DLA-NZ7, Инструкция по эксплуатации

Страница: 51 / 110

Selecting the Base Correction Value (Initial Value) for Adjustment
0
Selecting one of the “Custom 1” to “Custom 3” settings in “Gamma” allows you to select the “Correction Value”.
0
Select the base “Correction Value” for adjustment using the
H I
keys.
0
The selectable correction values vary according to “Picture Mode”. (Refer to the table below.)
List of selectable “Correction Value” according to “Picture Mode”
Picture Mode Correction Value
Film
x y
5 6
Film 1
Film 2
Import
Cinema
Natural
User 1 to User 3
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
Cinema 1
Cinema 2
Import
Picture Mode Correction Value
HDR10 HDR(PQ)
Import
HLG HDR(HLG)
Import
User 4 to User 6 HDR(PQ)
HDR(HLG)
Import
* Correction value cannot be configured when “Picture Mode” is configured to “Frame Adapt HDR”/“HDR10+”.
When “Correction Value” is set to “Import”
0
By selecting “Import” for “Correction Value”, the gamma data created externally can be selected as the base setting
value for adjustment.
0
The factory setting for “Import” is “2.2”.
0
You can use the calibration software to customize the gamma data adjustment, and import the created gamma data.
Please check with your authorized dealer for details.
51
Adjust/Set