JVC DLA-20LTD Скачать руководство пользователя страница 73

Страница: 73 / 84

This unit has obtained the “THX 3D Display Certification” by THX.

In addition to 2D movies, you can also enjoy faithful reproduction of images in a “quality as

intended by the filmmaker” during playback of 3D movies.
The THX 3D certification is “an indication of high definition and high resolution”, which is

granted to products that have cleared more than 400 image quality tests.

This unit is isf-certified, so calibration can be performed by an isf-certified trainer.

After calibration is performed, an isf mode is added to the Picture mode.
For more details, please refer to the isf website.

http://www.imagingscience.com/

About Trademarks and Copyrights

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United

States and other countries.

“x.v.Color” and the “x.v.Color” logo are trademarks of Sony Corporation

Others

Содержание DLA-20LTD





















































































Результаты поиска

Содержание DLA-20LTD

Отзывы:

Похожие инструкции для DLA-20LTD

Бренды по названию

Популярные бренды

JVC DLA-20LTD, Инструкция по эксплуатации

Результаты поиска

Содержание DLA-20LTD

Отзывы:

Похожие инструкции для DLA-20LTD

Бренды по названию

Популярные бренды