5.2 mm
2.8 mm
CS-V625: 4 m
CS-V525: 4 m
CS-V425: 2 m
CS-V625
CS-V525
CS-V425
SAFETY INSTRUCTIONS
Some Do’s And Don’ts On The Safe Use Of Equipment
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are
to obtain the best results and safety is to be assured.
DO
read the operating instructions before you attempt to use the equipment.
DO
ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made
and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.
DO
consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on equipment.
DON’T
continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug
and consult your dealer.
DON’T
remove any fixed cover as this may expose dangerous voltages.
DON’T
leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for
infirm or handicapped people.
DON’T
use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television
whilst driving.
DON’T
listen to headphones at high volume as such use can permanently damage your hearing.
DON’T
obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the
equipment.
DON’T
use makeshift stands and NEVER fix legs with wood screws–to ensure complete safety always fit the manufacturer’s approved stand or legs with the
fixings provided according to the instructions.
DON’T
allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL...
—
NEVER
let anyone, especially children, push anything into holes, slots or any other opening in the case–this could result in a fatal electrical shock;
—
NEVER
guess or take chances with electrical equipment of any kind–it is better to be safe than sorry!
CAR STEREO SPEAKER
CS-V625
CS-V525
CS-V425
Thank you for purchasing the JVC Car Stereo
Speaker. For the secure installation and perfect
operation of your speaker, please read the following
carefully.
Specifications
CS-V625
Type
: 16 cm (6 - 1/2”) 2-Way Coaxial Speaker
Power Handling Capacity : 210 W (MAX. MUSIC POWER)
Impedance
: 4
K
Magnet Mass
: 182
g
(6.4 oz)
Mass
: 0.67 k
g
(1.5 lbs)
CS-V525
Type
: 13 cm (5 - 1/4”) 2-Way Coaxial Speaker
Power Handling Capacity : 190 W (MAX. MUSIC POWER)
Impedance
: 4
K
Magnet Mass
: 153
g
(5.4 oz)
Mass
: 0.6 k
g
(1.4 lbs)
Parts
CS-V425
Type
: 10 cm (4”) 2-Way Coaxial Speaker
Power Handling Capacity : 160 W (MAX. MUSIC POWER)
Impedance
: 4
K
Magnet Mass
: 127
g
(4.5 oz)
Mass
: 0.45 k
g
(1 lbs)
Metal Net
Speaker cord
Grille
Screw
Speed nut
(ø4 x 25 mm)
x 2
x 8
(Design and specifications are subject to change without notice.)
x 2
x 2
x 8
(ø4 mm)
This symbol indicates that the product with this symbol should not be disposed as
general household waste at its end-of-life. If you wish to dispose of this product,
please do so in accordance with applicable national legislation or other rules in
your country and municipality. By disposing of this product correctly, you will help
to conserve natural resources and will help prevent potential negative effects on
the environment and human health.
This symbol is
only valid in the
European Union.
ENGLISH
Information for Users on Disposal of Old Equipment
CS-V625_V525_V425.indd 1
9/15/2006 10:59:54 AM
For Proper Installation and Use
Be sure to install the speakers according to the directions so as to prevent them from slipping accidentally
out of position due to the repeated impact of opening and closing doors or the tossing and bumping of the
vehicle.
Set the wiring firmly on the floor of the vehicle, taking the utmost care not to break wires while installing.
When installing the speakers in the doors, extra attention must be paid to allowing reasonable play to the
wires. The wiring, if given too much clip or clamp, will get pinched in between the door and body of the
vehicle when opening and closing doors.
Since the speaker installed in the door is positioned at the foot level, be careful not to damage the speaker
by giving it an inadvertent kick. Check the water outlet at the bottom of the door occasionally to ensure
that it drains well, leaving no rainwater inside the door.
Before connecting the speakers to the amplifier, confirm that the power has been turned off. The click
noise generated by the connection if the power is on may damage the speakers.
When cleaning the speakers, use a soft cloth and wipe the surface gently. Do not apply thinner or solvent.
1.
2.
3.
4.
5.
Right
Gray
White
Amplifier
Left
Black lined
2.8 mm
5.2 mm
A
. . Metal Net
B
. . Grille
C
. . Screw
D
. . Speaker
E
. . Speed Nut
Connection
Dimensions
Unit : mm
CS-V625
CS-V525
Right /
Left
Fig. 5
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Abb. 4
Afb.4
CS-V425
ø70
ø115
ø168
44.5
21.8
4-ø4.5 HOLES
ø138
ø65
ø102
ø145
45.9
17.7
4-ø4.5 HOLES
ø115
ø75
ø124
ø173
44
22
4-ø4.5 HOLES
ø142 (4-ø4.5 HOLES)
ø150 (4-ø5.4 HOLES)
ø155 (4-ø5.4 HOLES)
ø158 (4-ø5.4 HOLES)
ø142 (3-ø4.5 HOLES)
ø142
