JVC Connected Cam GY-HC900CHE Скачать руководство пользователя страница 95

Страница: 95 / 236

Playing Recorded Clips

To play back clips recorded on SD cards, switch to

the Media mode.

Press and hold the [CAM/MEDIA] selection button

in the Camera mode to enter the Media mode. A

thumbnail screen of the clips recorded on the SD

card is displayed.

You can play back the selected clip on the

thumbnail screen.
Memo :

When an SD card without any clips is inserted,

“No Clips” is displayed.

Operation Buttons

Use the operation buttons on the side control panel

or front side of the camera recorder to operate the

thumbnail screen.

B
C

[MENU/THUMB] Button

Displays the menu.

Press this button to close the menu screen

during menu display and return to the

thumbnail screen.

Cross-Shaped Button (

JKHI

)

Moves the cursor.

[STATUS/SET] (Play) Button

Sets the values and items. (Confirm)

Plays back the selected clip.

[CANCEL/RESET] (Stop) Button

Cancels settings and returns to the previous

screen.

[USER1] Button

Switches the OK mark of the clip selected by

the cursor.

If an OK mark has been appended, it will be

deleted. Otherwise, an OK mark will be

appended.

[USER3] Button

Switches the selection status of the clip

selected by the cursor.

Clips being selected are displayed with

check mark.

[USER4] Button

Enters the action selection screen.

[DISPLAY] Button

Switches to “Standard Screen”, “Detailed

Screen” or “Media Information Screen”.

Thumbnail Screen

“Standard Screen” and “Detailed Screen” are

available.

Use the [DISPLAY] button to switch between the

screens.

Thumbnails are displayed in order of recording

from the oldest to most recent.

Standard screen

SD Card Information

Displays the status of the inserted SD card,

selected SD card, write-protect switch, and

the need for restoring.

Use the [SLOT A/B] switch to switch slots.

Clips in slot A and B cannot be displayed at

the same time.

: Write-protect switch of the SD card

in slot A is set.

: SD card in slot B needs to be

restored or formatted, or is an

unsupported SD card.

Clip Mark

Displays the clip information (properties).

A
B

OK Mark

Clip is appended with OK mark.

Playing Recorded Clips

Playback

Содержание Connected Cam GY-HC900CHE













































































































































































































































Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды

JVC Connected Cam GY-HC900CHE, Инструкция по эксплуатации

Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды