JVC Connected Cam GY-HC900CHE Скачать руководство пользователя страница 59

Страница: 59 / 236

Adjusting the Brightness

Adjust the brightness using Iris, Gain, Shutter

speed and ND filter according to the brightness of

the object.

Adjusting the Brightness Automatically:

Automatic Brightness Adjustment (AE)

Mode

Iris, Gain, Shutter speed and ND filter are

automatically adjusted according to the brightness

of the object to maintain optimum brightness.

To set only the Gain, Iris and Shutter to Auto mode,

set the Full Auto mode to off before setting each

item to the automatic adjustment mode using the

user button assigned with “Full Auto”.

Set Gain, Iris and Shutter to Auto mode.

[Adjusting the Iris] (

P 60)

[Setting the Gain] (

P 61)

[Setting the Electronic Shutter] (

P 62)

Set the target level (brighter/darker) to

maintain optimum brightness during

automatic adjustment.

Press the user button assigned with “AE

Level” and when the “AE±” indication turns

white operate the cross-shaped button (

)

to set the target level.

This can be configured in [Camera

Function]

[AE Level].

100min

50min

282min

1/ 60

F2. 8

1 /64

12 :34 : 56

ISO

102400

00: 00: 00.00

1080 /30p

SDI IN

ITU709

COMPRESS

5 . 6f t

B 5600

Memo :

Using the user button assigned with “Full Auto”

to enter the Full Auto mode also activates the

automatic brightness adjustment (AE) mode. In

this case, the White Balance also enters into

Auto mode forcibly.

The convergence speed of the automatic

adjustment for automatic brightness adjustment

(AE) can be set in the menu.

(

P109 [ AE Speed ] )

If one or more of the items (Gain, Iris and

Shutter) have been set to Auto mode, the value

of the corresponding items when the user button

that is assigned “AE Lock” is pressed can be

fixed.

(

P113 [ AE Lock ] )

If one or more of the items (Gain, Iris and

Shutter) have been set to Auto mode, the

automatic brightness adjustment (AE) mode is

enabled.

Adjusting the Brightness Manually

Use the user button assigned with “Full Auto” to set

Full Auto mode to off, some or all of the items (Iris,

Gain and Shutter Speed) can be manually

adjusted.

Set Full Auto mode to off using the user

button assigned with “Full Auto”.

Adjust the Iris, Gain and Shutter speed.

[Adjusting the Iris] (

P 60)

[Setting the Gain] (

P 61)

[Setting the Electronic Shutter] (

P 62)

Memo :

The brightness cannot be manually adjusted in

the Full Auto mode.

If Iris, Gain and Shutter Speed are manually

adjusted, the [AE Level] setting is temporarily

disabled.

Adjusting the Brightness

ooting

Содержание Connected Cam GY-HC900CHE













































































































































































































































Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды

JVC Connected Cam GY-HC900CHE, Инструкция по эксплуатации

Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды