JVC Connected Cam GY-HC900CHE Скачать руководство пользователя страница 49

Страница: 49 / 236

Removing the SD Card

Check that the SD card to be removed is not

being accessed (status indicator of the

card slot lights up in red).

Press the SD card cover knob to open the

cover.

Push the SD card and remove it from the

slot.

Close the SD card cover.

Memo :

When both slots are inserted with usable SD

cards, the previously selected slot is used.

Caution :

Data may be lost if you turn off the power of the

camera recorder or remove the SD card when it

is being accessed. All data recorded on the

card, including the file that is being accessed,

may be corrupted. Be sure to check whether the

status indicator is lit in green or turned off before

you turn off the power or remove the SD card.

If you mistakenly remove the card when it is

being accessed, reinsert the card only after the

status indicator goes off.

The SD card may not be recognized if you insert

and remove the card within a short time. When

this happens, remove the card and wait for a few

seconds before you reinsert.

Switching the SD cards

When both card slots are inserted with SD cards,

you can use the [SLOT SELECT] button to switch

the card to use.

When the memory on an SD card is full during

recording, data recording automatically switches to

the other card.
Memo :

The [SLOT SELECT] button is disabled during

recording or playback. Cards will not be

switched even if you press the button.

SD Card

ati

ons

Содержание Connected Cam GY-HC900CHE













































































































































































































































Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды

JVC Connected Cam GY-HC900CHE, Инструкция по эксплуатации

Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды