JVC Connected Cam GY-HC500E, Инструкция по эксплуатации

Страница: 180 / 268

Saving Setup Files
1 Display the [Setup File] menu.
Select [System]
B
[Setup File] and press the
Set button (
R
).
(
A
P154 [ Setup File ] )
2 Select [Store File] and press the Set button
(
R
).
3 Select [Picture File], [User File] or [All File],
and press the Set button (
R
).
The existing files are displayed.
4 Select the file to be newly saved (or
overwritten) using the cross-shaped
button (
JK
), and press the Set button (
R
).
.
4
Memo :
0
Files cannot be written in the following cases.
(Displayed in gray, selection disabled)
0
When the inserted SD card is not supported or
not formatted. (File name appears as “---”.)
0
When a write-protected SD card is inserted
(a
z
mark appears beside the SD card icon).
5 Name the file.
0
Enter the subname using the software
keyboard.
(
A
P109 [Text Input with Software Keyboard] )
0
You can enter up to 8 characters for the
[Store File]/[Picture File] subname.
Memo :
0
When overwriting an existing file, the subname
of the existing file is displayed.
0
Select [Cancel] and press the Set button (
R
), or
press the [CANCEL] button to return to the
previous screen.
6
Select [Store] and press the Set button (
R
).
.
6
5
7 Save the file.
0
A confirmation screen appears when you
choose to overwrite.
Select [Overwrite] on the confirmation
screen, and press the Set button (
R
). Saving
starts, and “Storing...” appears on the screen.
.
:SUNSET
7
Load Picture File
Cancel
Overwrite
Overwrite Picture File?
0
Saving starts, and “Storing...” appears on the
screen when the file is newly saved.
.
8
Saving is complete.
After saving of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
180
Configuring Setup Files
Camera Features