JVC CA-MXC55, Руководство по обслуживанию

Страница: 6 / 37

1-6 (No.MB557)
SECTION 3
DISASSEMBLY
3.1 Main body section
3.1.1 Removing the top cabinet
(See Figs.1 and 2)
(1) From the both sides of the main body, remove the six
screws A attaching the top cabinet. (See Fig.1)
(2) From the back side of the main body, remove the three
screws B attaching the top cabinet. (See Fig.2)
(3) Take out the top cabinet from the main body while lifting the
rear section of the top cabinet in the direction of the arrow.
(See Fig.1)
3.1.2 Removing the CD mechanism assembly
(See Figs.2 to 4)
• Remove the top cabinet.
(1) From the back side of the main body, remove the two
screws C attaching the CD mechanism assembly to the
rear cabinet. (See Fig.2)
(2) From the bottom side of the CD mechanism assembly, turn
the gear cam in the direction of the arrow and draw the tray
disc out of the CD mechanism assembly in the direction of
the arrow 1. (See Fig.3, 4)
(3) Remove the CD door from the tray disc in the direction of
the arrow 2. (See Fig.4)
(4) From the left side of the main body, disconnect the wire
from the connector CN105 on the main AMP board. (See
Fig.4)
(5) Disconnect the card wire from the connector CW105 on the
CD board. (See Fig.4)
(6) From the both sides of the main body, remove the two
screws D and then take out the CD mechanism assembly
from the main body. (See Fig.4)
Fig.1
Fig.2
Fig.3
Fig.4
Top cabinet
A
A
A
Rear cabinet
C
C
B
B B
CD deck
Gear cam
OPEN
Main AMP board
D
CD mechanism
2
CD board
1
CN105
CD door
tray disc