The BR-EN900 Quick Setup Guide
192.168.1.3
•
Set PC IP address to 192.168.1.xxx
•
Connect to the Ethernet 1 port
•
Enter
192.168.1.3
in the browser
•
Default password –
jvc1234
•
Configure
IP address
,
Default Gateway
and
DNS
servers
•
Confirm that
Use as Primary Default Gateway
is “checked” for the LAN port in use.
•
Click
Apply
to save settings
SDI
HDMI
DVI-D
H.264
•
UDP TS
•
RTP TS
•
Pro-MPEG (RTP+SMPTE2022 FEC)
•
Zixi
•
RTP ES (RTSP pull)
•
UDP TS
•
RTP TS
•
Pro-MPEG (RTP+SMPTE2022 FEC)
•
Zixi
•
RTMP (CDN)
HEVC
The BR-EN900 features two encoding channels – HEVC and H.264, each with a separate IP destination.
Input
must be selected in the HEVC channel settings, the H.264 channel will follow HEVC selection.
Remember to click
Apply
after any change.
Save existing configuration and select
Auto Start
to apply all settings after power OFF/ON
Save Configuration
Select
Auto Start
Select Input
Configure channels
Both channels encode video from the same input but can
stream to different destinations / IP addresses.
Protocols:
