JVC 0807TNH-II-IM, Руководство пользователя

Страница: 12 / 88

12
Quick Setup
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Before you can operate your remote control, you first need
to install the batteries (included).
Raise the latch on the remote's back cover to remove.
Insert two batteries, carefully noting the "+" and "–"
markings. Place the "–" end in the unit first. Snap the
cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes (ex. VCR,
DVD) may have to be reset. See pages 69 - 74.
Getting Started
Step 1 – The Remote Control
Using Menu Buttons
To use the menu functions, press the M
ENU
button. Next,
select a menu using the four arrow keys. The four arrow keys
are used only for menu selections.
DVR
STATUS
OK
M
E
N
U
FA
VO
RITE
ASP
EC
T
B
A
C
K
Basic Operation
Turn the television on and off by pressing the P
OWER
button at the top right corner
of the remote. If this is the first time you are turning on the TV, the interactive
plug in menu appears.
• At first, to watch your TV, select the TV mode by pressing the M
ODE
button on
the remote control before you turn the TV power on.
• See page 58 to 68 for details regarding the remote control buttons.
POWER