Justin JA-300-2000 Скачать руководство пользователя страница 1

BEFORE INSTALLING AND USING THE PRODUCT, 

PLEASE READ THE INSTRUCTIONS THOROUGHLY, 

AND RETAIN THEM FOR FUTURE REFERENCE. 

PRODUCT OVERVIEW 

       

1. 

12V Auto Plug

2. 

USB Output Ports 

3. 

Status Indicator LED

4. 

Battery Capacity Indicator

5. 

Power Button

6. 

Micro USB Input

Included

: (1x) Power Bank and (1x) Charging Cable

SPECIFICATIONS

To ensure safe operation, check your device’s

compatibility with Power Bank specifications prior to use.

LED LIGHTS

The Power Bank includes a Status Indicator LED and a 
Battery Capacity Indicator to show the working status 
and remaining battery power level.

USE

Charge the Power Bank until the Status LED Indicator turns 
blue. This may take up to 3-4 hours and may fluctuate 
depending on the charging power source. To check the 
Power Bank’s battery level, press the Power Button and 
read the Battery Capacity Indicator (see chart above).

Important: Before first use, charge the power bank a full 6 
hours. After the initial charge, normal charging will take 
3-4 hours.

1.  Charging the Power Bank:

 

  Plug the supplied Micro USB cable into the Power 

Bank’s Micro USB input. Next, insert the USB end of 
the charging cable into a computer or AC power 
source with a USB Output Port of 5V. While charging, 
the Status Indicator LED will turn red. Once charging 
is complete, the LED will turn blue. 
Note: This power bank can also be charged via the 
12V socket in your favorite car/truck. 

2. Charging Your Smartphone, Etc:

 

Using your device’s supplied charging cable (Apple

®

 

Lightning

 cable, Micro USB cable, etc.), plug your 

smartphone, tablet or other USB powered device into 
the USB Output Port of the Power Bank. Press the 
Power Button on the Power Bank to begin charging 
your device. Charging will continue until your device is 
fully charged or the Power Bank has drained.

Important: Please check for voltage compatibility with 
your device prior to use.

3. Charging via the 12V Auto Plug

 

The power bank can be used as a 12-24V to USB  
adaptor when in the car. Plug the power bank into your 
vehicle’s 12V socket via the 12V Auto Plug. Next, plug 
your device into either of the USB Output ports to 
begin charging. 

Note:

 If charging a device in your car 

via the 12V socket, please make sure to unplug your 
device once it is fully charged. If you experience unstable 
charging as a 12-24V to USB adaptor, please unplug all 
charging devices and leave the car charger charging via 
the 12V socket in your car/ truck for 30 minutes. 

PLEASE NOTE

•  The Power Bank comes pre-packaged with a partial 

charge, NOT a full charge. We recommend fully charging 
your Power Bank before first use for best performance.

•  If your device (smartphone, tablet, etc.) is not charging, 

this may be a sign that the battery level of the Power 
Bank is very low and you need to recharge it.

•  Your Power Bank includes a special Micro USB to USB 

cable. Some devices, namely BlackBerry

®

 devices, 

REQUIRE this cable for charging. If you do not use this 

cable, your device might not charge.

•  Some devices require you to turn OFF the device prior 

to charging via the Power Bank. If the device is left ON 
and plugged into the Power Bank, the device will show 
a small red “X” over the battery icon signifying that it is 
not charging. There is no need for concern, this will not 
harm your device. Simply turn OFF your device to 
continue charging.

•  It is normal for the Power Bank to become slightly 

warm during use.

MAINTENANCE

In order to keep your Power Bank operating at maximum 
potential, please follow these guidelines:

1.

 Recharge the Power Bank every 2 months when not in 

use. Charge to at least 40%, as this will extend the 
battery life.

2.

 Keep your Power Bank dry and away from moist and 

corrosive materials. DO NOT get wet. In addition,   
never expose to high heat environments. Avoid 
extreme temperatures of hot or cold as it will decrease 
the overall battery performance.

CAUTIONS

Please read this section carefully before using.

•  Only use this product with confirmed power sources 

that follow device specifications. Device is intended to 
be used with iPhone

®

, mobile phones and other digital 

products. Only use specified charging methods or 
reputable branded chargers that are compatible with 
device specifications.

•  Do not use product beside or in close proximity to a 

heat source such as a ventilation heat vent, convection 
heater, burner, etc.

•  Do not expose device to moisture or submerge it in 

liquid. Do not leave device inside an excessively hot or 
cold environment. Store device in a cool and dry 
environment at all times.

•  Avoid dropping or applying excessive shock and force 

to device. Do not use in unprotected outdoor 
environments or in exposed sunlight for a prolonged 
period of time.

•  Do not use device in a confined space. Restricted or 

insufficient airflow will put device at risk of overheating.

•  Avoid touching metal prongs when plugging and 

unplugging device from power source.

•  Do not use harsh chemicals to clean device. Use a 

damp cloth with warm water to wipe off any dirt. Only 
clean the device when it is unplugged from any power 
source.

•  Ensure charge port is clear of any foreign objects 

before using. Do not force incompatible connectors 
into any port. 

•  Do not used damaged cables and wires on device. 

Avoid using cables to charge Power Bank other than 
supplied for optimal and safe operation. Supplied 
cables have gone through rigorous testing to ensure 
compatibility.

•  Do not attempt to disassemble the device. Any 

attempts to do so will void all warranties on this 
product. Do not attempt to remove or salvage 
batteries for other purposes.

SAFETY INSTRUCTIONS

Read all instructions and warnings prior to using this 

product. This device contains a Lithium-ion (Li-ion) 
battery. Improper use, storage and disposal may cause 
leaks, expansions and explosions that could lead to fires, 
health concerns, bodily injury and property damage.

•  Upon the event where the device may be broken, 

shattered, or in any way physically compromised DO 
NOT USE.

•  Do not dispose device into standard garbage disposal 

sites. Dispose of device at available Battery Recycling 
Sites after fully discharging battery. Not doing so may 
violate local disposal laws and regulations.

•  NOTE: Opening of product and/or removal of battery 

will render product inoperative and voids manufacturer 
warranties, dispose of remaining product components 
in accordance with local laws.

•  If unusual expansion is detected, disuse device 

immediately. In case of fire, use lithium approved 
“Class D Type” Fire Extinguishers on device.

•  Do not expose or dispose of device into fire.
•  In the unfortunate case of a leak and electrolyte comes 

in contact with skin, wash area with water and soap. 

  If electrolyte makes contact with eyes, flush with 

generous amounts of water for 15 minutes and seek 
medical attention immediately. Avoid inhaling fumes if 
applicable. Do not attempt to reuse damaged device.

•  Do not charge device with unspecified power source. 

Only use specified method of charge and reputable 
brand OEM chargers compatible with device 
specifications.

FCC STATEMENT

Warning: Changes or modifications to this unit not 
expressly approved by the party responsible for compliance 

could void the user authority to operate the equipment.

NOTE:

 This equipment has been tested and found to 

comply with the limits for Class B digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on. 
The user is encouraged to try to correct the interference 
by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and 

the receiver.

•  Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV 

technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC 
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO 
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL 
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY 
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE 
THAT MAY CAUSE UNDESIRED OPERATION.

CALIFORNIA PROP 65 WARNING

WARNING:

 This product contains chemicals known to 

the State of California to cause birth defects or other 
reproductive harm. For more information on these 
regulations and a list of chemicals, log on to the following 
website address: 

http://www.oehha.ca.gov/prop65.html

INNOVATIVE TECHNOLOGY ELECTRONICS CORP.

LIMITED WARRANTY: 90 DAYS LABOR, ONE YEAR PARTS

Innovative Technology Electronics Corp. (IT) warrants the product to be free from 
“Defects” in materials under normal use for a period of “One Year” from the date of 
the original purchase. The Warranty is “Not” transferable. IT agrees, within the 
initial “90 Day” period, to repair or replace the product if it is determined to be 
defective at “No Charge”. It is further agreed that IT will cover the cost to repair or 
replace damaged “Parts” only for a total period of “One Year” from the date of the 
original purchase. The warranty does not cover cosmetic damage, antennas, AC 
cords, cabinets, headbands, ear-pads, or damage due to line power surges, 
connection to improper voltage supply or settings, misuse, mishandling, accident, 
acts of God or attempted repair by an unauthorized service agent.

To obtain service, the purchaser MUST present an original sales receipt / proof of 
purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return 
Material Authorization) number to return products for service or replacement. Returns 
without an RMA number on the package will be refused and returned to sender. 
Upon receipt of the returning item and our full inspection (IT) may issue a 
replacement to customer for the same item or of one that has equivalent value and 
features. To return an item, supply full name, return address, phone number, item 
purchased, receipt of purchase and reason for return to obtain RMA number.  
All returns must be in the original packaging or reasonable substitute to prevent 
damage. Customer “Must” include full name, shipping address and telephone 
number inside of package. No return will be shipped back to a PO Box or
APO address.

Please include your check or money order in the amount of:

 USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)

 USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit)

 USD$16.00, for items $100.00 and up. (Price Paid Per Unit)

 Shipping fees are non-refundable

 
To be payable to Innovative Technology Electronics Corp.(for handling and return 
shipping charges) (IT) will not be responsible for delays or unprocessed claims 
resulting from a purchaser’s failure to provide any / all of the necessary 
information. Send all inquiries or RMA request via our website: 
www.ithomeproducts.com/support.

Innovative Technology Electronics Corp.

1 Channel Drive

Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support
 

There are no express warranties except as listed above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE 
EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR 
IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY 
APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE 
DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential 
damages, or limitations on how long an implied warranty lasts, so the above 
exclusions or limitations may not apply to you. This warranty gives you specific 
legal rights and you may also have other rights, which vary from state to state.

NOTE: As a result of continual improvements, the 
design and specifications of this product are 
subject to change without notice.

Apple and iPhone are trademarks of Apple Inc., registered in the U.S. 

and other countries. Lightning is a trademark of Apple Inc. Lightning 

cord NOT included. Smartphones and Tablets are NOT included.

2,000mAh Power Bank

With Built-In 12V Adaptor

Model:

JA-300-2000

USER MANUAL

1

by

Содержание JA-300-2000











Отзывы: