Elektroapparate AG
Technical information
Technical Support
Language
EN
IMPRESSA XJ9 One Touch TFT
Professional
Author: Patrik Studer
Checked:
Approved:
Docu.-name:
Technische_Informationen_XJ9_EN.doc
L:\Geräte\Linie_XJ\XJ9\Schulungsunterlagen\E\Technische_
Informationen_XJ9_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
26.06.2012
15.11.2012
23.11.2012
12.03.2013
02.04.2013
08.08.2013
Page 15/17
19
Prepare appliance for resale:
Procedure:
All products will be reset to factory settings and the fluid system is empty due to protection against frost.
The appliance asks the customer for the desired language and afterwards it will fill the system with water.
Initial position:
The appliance is fully working and if necessary, an exit diagnosis has been made with the animation system.
1.
Switch on appliance until the following message appears on the display
PLEASE SELECT PRODUCT
2.
Go into the program to
MACHINE SETTINGS/FACTORY SETTINGS/MACHINE
3.
The display shows
SAVED
and the appliance switches off automatically
4.
Switch on appliance again and confirm procedures until the following message appears on the
display
PLEASE SELECT PRODUCT
5.
Empty the system completely (frost protection) according to the manual
Draw off steam (MILK PORTION)
Remove the water tank
Draw off steam (turn Rotary Switch) until the appliance stops automatically
6.
Switch off appliance
7.
Switch on appliance again (no water in the water tank, display message
FILL WATER TANK
)
8.
Press key combination
4 (1 ESPRESSO) & ROTARY SWITCH
simultaneously until the following
message appears on the display
SAVED
9.
Switch off appliance
