JA95-N02 Audio Controller - Six Transceiver - NVG
Installation and Operating Manual
Rev B
Page 2
1.3
Inputs and Outputs
for the mating connector designators and pin assignments for the
input and output signals.
1.3.1
Inputs
Name
Qty
Type
ALERT ENABLE
1
Active high discrete
ALERT KEY
2
Active low discrete (Feature selected from ProCS)
CALL
1
Active low discrete (Feature selected from ProCS)
CONFIG DATA TO JA95
1
Data signal
DIRECT AUDIO
2
Audio signal (one selected from ProCS)
FRONT PANEL MUSIC
2
Audio signal
LIGHTS INPUT
1
Analog control signal
MIC HI/LO
6
Audio signal
MODE SELECT / CONFIG AUDIO
1
Multi format signal
MUSIC
2
Audio signal
PAX 1 ICS PTT
1
Active low discrete (Feature selected from ProCS)
PAX 1 TX PTT
1
Active low discrete (Feature selected from ProCS)
PILOT and COPILOT ICS PTT
2
Active low discrete
PILOT and COPILOT TX PTT
2
Active low discrete
POWER INPUT
1
14 to 28 Vdc power supply
RX HI/LO AUDIO
11
Audio signal (6 Com TX, 5 Nav RX)
1.3.2
Outputs
Name
Qty
Type
CVR
1
Audio signal (Feature selected from ProCS)
CONFIG DATA FROM JA95
1
Data signal
PHONES
7
Audio signal
Note: There are 6 outputs for driving 7 phones.
MF SW (Multifunction Switch)
2
Active low discrete (Feature selected from ProCS)
MIC
6
Audio signal (transceiver MIC)
Transmit PTT
6
Active low discrete
RX COMP OUT
1
Audio signal (Feature selected from ProCS)
1.3.3
Bi-directional Ports
Name
Qty
Type
ICS TIE
1
Audio signal
DIGITAL TIE IN & OUT
1
Not implemented
