Jupiter Avionics JA34-BT1 Скачать руководство пользователя страница 6

Страница: 6 / 26

JA34-BT1 Universal Radio Adapter with Bluetooth

Installation and Operating Manual

Rev D

Page 3

1.4.2

Mechanical Specifications

Height
Depth
Width
Weight
Material

Connectors (3):

J2, J3

Mounting
Bonding
Installation kit part number

1.27 in [32.3 mm] maximum
2.42 in [61.5 mm] maximum
4.52 in [114.8 mm] maximum
0.43 lb [0.20 kg] maximum
brushed aluminum with conversion

coating
Two 4 pole 3.5mm jack

One 25-pin D-Sub male V5 locking
4 x 10-32 fasteners

≤

2.5 m

Ω

INST-JA34

1.4.3

Flammability of Materials

1.4.4

Product Configuration Software

ersion

The JA

1 complies with the requirements of RTCA/DO-160G Sec 26.3.3 "Flammability", through equivalent

flammability testing of materials and the Small Parts Exemption.

Configuration of the JA34-BT1 requires the Product Configuration Software (ProCS) version v0.16.4 or later.

Refer to the release notes from http://www.jupiteravionics.com/productsoftware.php or contact Jupiter Avionics

to ensure the correct version is used.

ontains Transmitter Module FCC ID: QOQWT32AE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

ontains Transmitter Module Industry Canada ID: 5123A-BGTWT32AE

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following

two conditions:

(1)

this device may not cause interference, and

(2)

this device must accept any interference, including interference that may cause undesired operation of the device

Cet appareil est conforme aux normes RSS sans licence d'Industrie Canada. Son fonctionnement est soumis aux

conditions suivantes :

(1)

cet appareil ne doit pas causer d'interférences et

(2)

doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement indésirable de

llll

'appareil.

1.4.

FCC Compliance Statement

1.4.

IC Compliance Statement

1.4.

Co-location with Other Transmitters

Ensure all JA34-BT1 units are installed with at least 20 cm between other JA34-BT1 units and antennae from

other transmitting equipment.

Содержание JA34-BT1



























Результаты поиска

Содержание JA34-BT1

Отзывы:

Похожие инструкции для JA34-BT1

Бренды по названию

Популярные бренды

Jupiter Avionics JA34-BT1, Инструкция по установке и эксплуатации

Результаты поиска

Содержание JA34-BT1

Отзывы:

Похожие инструкции для JA34-BT1

Бренды по названию

Популярные бренды