JA33-001 Bluetooth
®
Transceiver
Installation and Operating Manual
Rev C
Page 9
2.6.5
Aircraft Audio Systems List
This is a list of Aircraft Audio Systems, and shows the configuration information that will be added to the
JA33-001
Settings
page.
If it is desirable to add other Audio systems, click on the
Aircraft Audio Systems List
. A new audio system and its
parameters can be added by clicking on (the ‘
New
Aircraft Audio System
' button). A new line will be added to the
bottom of the list, and double clicking on each part of the line will highlight it to allow changes. When the relevant
details have been added, use the (‘
Save Changes
’) or (‘
Cancel All Changes
’) button as required. The added
system will then appear on the appropriate drop-down menu list.
2.6.6
Bluetooth
®
Devices List
This is a list of Bluetooth
®
Sources and the configuration information that will be added to the
JA33-001
Settings
page. The list is similar to the Aircraft Audio Systems list, and new Bluetooth
®
Sources can be added in the same
way.
2.6.7
Serial Data Devices List
This is a list of Serial Data Devices and the configuration information that will be added to the
JA33-001
Settings
page. The list is similar to the Aircraft Audio Systems list, and new devices can be added in the same way.
2.6.8
JA33-001 Connector Maps
JA33-001 Connector Maps and Interconnects are included here for information only.
2.6.9
Other Configuration Features
In the JA33-001 Product Information Window, the model number, serial number and check sum of the JA33-001
Bluetooth® Transceiver can be viewed.
2.7
Installation Kit
The kit required to install this unit is not included with the unit.
The installation kit (Part # INST-JA33) consists of the following:
Quantity
Description
JAC Part #
1
TAG ring
CON-5500-0375
1
D-Sub 15-pin connector, hood and 15 crimp pins
CON-3420-0015
1
Heat Shrink Tubing
WIR-HTSK-0750