Problem
Possible cause
Remedy
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable.
Use cookware suitable for induction
hobs. Refer to "Hints and tips".
The diameter of the bottom of the
cookware is too small for the
zone.
Use cookware with correct dimen‐
sions. Refer to "Technical data".
and a number come on.
There is an error in the hob.
Deactivate the hob and activate it
again after 30 seconds. If
comes on again, disconnect the hob
from the electrical supply. After 30
seconds, connect the hob again. If
the problem continues, speak to an
Authorised Service Centre.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes
on. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model JKSI808R9
PNC 949 594 487 00
Typ 62 D4A 01 AA
220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW
Made in: Germany
Ser.Nr. .................
7.35 kW
JUNO
9.2 Cooking zones specification
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W]
PowerBoost
maximum du‐
ration [min]
Cookware di‐
ameter [mm]
Left front
2300
3200
10
180 - 210
Left rear
2300
3200
10
180 - 210
Middle front
1400
2500
4
125 - 145
Right rear
2300
3600
10
180 - 240
ENGLISH 39
Содержание JKSI808R9
Страница 61: ...61...
Страница 62: ...62...
Страница 63: ...63...
Страница 64: ...www juno de 867373528 A 092022...