background image

WLM1200-RMTS™Quick Start Guide

2

Verify Appliance Package

Copyright © 2011, Juniper Networks, Inc.

 WLM1200-RMTS

Quick Start Guide

This guide provides a description of prerequisite procedures required to install and begin using 

WLM1200-RMTS 

hardware and software.

 

The

 WLM1200-RMTS 

provides a server with pre-installed 

RingMaster 

software. This appliance provides a server platform having a suitable configuration and 

capability to efficently run the included 

RingMaster Services 

software.

Verify Appliance Package

Figure 1–1.  

WLM1200-RMTS Front Pane

l

Verify that the appliance kit includes:

Two-page hardware setup guide with illustrated rack installation instructions.

A power cord.

Fasteners to install the appliance into a rack.

The appropriate rack assembly — a 19-inch rack rail bracket assembly or telco style rack assembly

   

Verify Appliance Package   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

Setup Location Requirements   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

WLM1200-RMTS Appliance Setup   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

Forgotten Password Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

Reset button

UID button

Power button

Содержание WLM1200-RMTS









Отзывы: