Juniper SRX220, Руководство по оборудованию, Страница: 89 / 182

Table 31: Port Settings for Connecting to the CLI at User End
Value Port Setting
9600 Bits per second
8 Data bits
None Parity
1 Stop bits
None Flow control
5.
In the HyperTerminal window, enter AT .
For more information on the AT commands, see the following topics:
• Initial Configuration for Security Devices
• Monitoring and Troubleshooting for Security Devices
An OK response verifies that the modem can communicate successfully with the COM
port on the PC or laptop.
6.
Dial the modem that is connected to the console port on the services gateway by
entering
ATDT remote-modem-number
. For example, if the number of the modem
connected to the console port on the services gateway is
0013033033030
, enter
ATDT
0013033033030
.
The services gateway login prompt appears.
7.
Log in as the user
root
. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
•
Configuring the Modem at the SRX220 Services Gateway End on page 98
•
Connecting the Modem to the Console Port on the SRX220 Services Gateway on
page 70
•
SRX220 Services Gateway Software Configuration Overview on page 77
71 Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Connecting the SRX220 Services Gateway to External Devices