Juniper QFX5220 Скачать руководство пользователя страница 75

Страница: 75 / 247

Table 24: DC Power Supply LEDs on a QFX5220-32CD

Description

LED Color

Status

The power supply is disconnected from power, or power is not coming

into the power supply.

Off

Input OK

Input voltage is present and is within range.

Green, on steadily

The power supply is running at the power limit or is over current.

Off

Output OK

The power supply is operating correctly.

Green, on steadily

A power supply fault or error has occurred in the power supply. Replace

the power supply as soon as possible. To maintain proper airflow

through the chassis, leave the power supply installed in the chassis until

you are ready to replace it.

Amber, on steadily

Fault

The power supply is not valid. Check the model number.

Amber, blinking

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 75 / 247

Результаты поиска

Содержание QFX5220

Отзывы: