Juniper QFX5220 Скачать руководство пользователя страница 194

Страница: 194 / 247

•

If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your rack

or cabinet.

This topic describes:

Packing a QFX5220 Switch for Shipping

To pack a QFX5220 for shipping:

1. Power down the switch and remove the power cables. See

“Powering Off a QFX5220” on page 171

2. Remove the cables that connect the QFX5220 to all external devices.

3. QFX5220-128C only–Remove the EMI door (see ).

4. Remove all field-replaceable units (FRUs) from the switch.

5. Have one person support the weight of the switch while another person unscrews and removes the

mounting screws.

6. Remove the switch from the rack or cabinet (see

“QFX5220 Installation Safety Guidelines” on page 112

)

and place the switch in a large antistatic bag.

7. Place the switch in the shipping carton.

8. Place the packing foam on top of and around the switch.

9. If you are returning accessories or FRUs with the switch, pack them as instructed in

“Packing QFX5220

Components for Shipping” on page 201

10. Replace the accessory box on top of the packing foam.

11. Close the top of the cardboard shipping box and seal it with packing tape.

12. Write the RMA number on the exterior of the box to ensure proper tracking.

200

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 194 / 247

Результаты поиска

Содержание QFX5220

Отзывы: