Juniper QFX10016, Руководство по оборудованию

Страница: 403 / 439

QFX10016 Chassis Lifting Guidelines
The weight of a fully loaded QFX10016 base AC configuration is approximately 522 lbs (336.8 kg) and
596 lbs (270.34 kg) for the redundant AC configuration. Similarly, the weight of a redundant DC
configuration is 591 lbs (268.1 kg). Observe the following guidelines for lifting and moving a QFX10016:
CAUTION: To avoid serious injury, do not attempt to move the QFX10016 without a
mechanical lift.
• Before installing a QFX10016, read the guidelines in QFX10008 Site Preparation Checklist to verify
that the intended site meets the specified power, environmental, and clearance requirements.
• Before moving the QFX10016, disconnect all external cables.
• When raising the QFX10016 into the rack using a mechanical life, have one person lift and align the
switch with the rack while another person secures the switch to the rack.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 386
Installation Instructions Warning | 391
Mounting a QFX10016 in a Four-Post Rack Using a Mechanical Lift | 207
Restricted Access Warning
WARNING: This unit is intended for installation in restricted access areas. A restricted
access area is an area to which access can be gained only by service personnel through
the use of a special tool, lock and key, or other means of security, and which is
controlled by the authority responsible for the location.
Waarschuwing Dit toestel is bedoeld voor installatie op plaatsen met beperkte toegang.
Een plaats met beperkte toegang is een plaats waar toegang slechts door
servicepersoneel verkregen kan worden door middel van een speciaal instrument, een
slot en sleutel, of een ander veiligheidsmiddel, en welke beheerd wordt door de
overheidsinstantie die verantwoordelijk is voor de locatie.
392