Juniper PTX10003-160C, Руководство по оборудованию, Страница: 155 / 225

PTX10003 Alarm Messages Overview
When the Routing Engine detects an alarm condition, it lights the red or yellow alarm LED on the
management panel as appropriate. To view a more detailed description of the alarm cause, issue the
show system alarms CLI command:
user@host>
show system alarms
6 alarms currently active
Alarm time Class Description
2018-02-07 12:12:18 PST Major FPC Management1 Ethernet Link Down
2018-02-07 12:11:54 PST Minor FPC0: LED 3:Alarm LED Read Error
2018-02-07 12:11:54 PST Minor FPC0: LED 3:Alarm LED Write Error
2018-02-07 12:11:54 PST Major FPC0: PEM 1 Not Supported
2018-02-07 12:11:54 PST Major FPC0: PEM 0 Not Supported
2018-02-07 12:11:54 PST Major FPC0: PEM 0 Not Powered
SEE ALSO
Definitions of Safety Warning Levels | 176
PTX10003 System Alarm Messages and Recommended Actions
System alarms indicate a failure on the device or one of its components. System alarms are preset and
cannot be modified.
System alarms on PTX10003 routers have two severity levels:
•
Major (red)—Indicates a critical situation on the device that has resulted from one of the conditions
described in Table 36 on page 157 . A red alarm condition requires immediate action.
•
Minor (yellow or amber)—Indicates a noncritical condition on the device that, if left unchecked, might
cause an interruption in service or degradation in performance. A yellow alarm condition requires
monitoring or maintenance.
Table 36 on page 157 describes the system alarm messages on the PTX10003.
156