Juniper MX480, Руководство по оборудованию

Страница: 357 / 420

3 Empty
4 Empty
5 Online 42 6 0 1024 16 57
NOTE: The show chassis fpc command displays the status of the DPCs.
For more detailed output, add the
detail
option. The following example does not specify
a slot number, which is optional:
user@host>
show chassis fpc detail
Slot 2 information:
State Online
Temperature 22 degrees C / 71 degrees F
Total CPU DRAM 1024 MB
Total SRAM 256 MB
Total SDRAM 0 MB
Start time 2006-11-03 07:35:40 PST
Uptime 2 hours, 27 minutes, 1 second
Slot 4 information:
State Online
Temperature 22 degrees C / 71 degrees F
Total CPU DRAM 1024 MB
Total SRAM 256 MB
Total SDRAM 0 MB
Start time 2006-11-03 07:35:48 PST
Uptime 2 hours, 26 minutes, 53 seconds
Slot 7 information:
State Online
Temperature 24 degrees C / 75 degrees F
Total CPU DRAM 1024 MB
Total SRAM 256 MB
Total SDRAM 0 MB
Start time 2006-11-03 07:35:53 PST
Uptime 2 hours, 26 minutes, 48 seconds
For further description of the output from the commands, see the Junos OS
Administration Library .
See Also Installing an MX480 DPC on page 271
•
•
MX480 DPC Terminology
•
Maintaining MX480 DPCs on page 264
Troubleshooting the MX480 FPCs
Problem Description: The FPCs are not functioning normally.
357 Copyright © 2019, Juniper Networks, Inc.
Chapter 5: Troubleshooting Hardware